MAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer Top Sensors Manufacture CHARACTERISTICS ADVANTAGES Measuring range up to 2.5 m Designed for installation into hydraulic cylinders High shock and vibration resistance Customizable cursor Absolute contactless linear position measurement High resolution and linearity Unlimited mechanical life Rod, nipple and flange in AISI 316 Easy installation and field replacement Position, speed and acceleration measurement High protection level Reverse polarity protection Wide temp. range RoHS compliant The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com

MAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer PRODUCT DESCRIPTION The only external part is the head whose slim profile facilitates installation in confined spaces and allows easy maintenance operations. Its unique design, plus a wide range of cursor configurations, ensure easy installation and full compatibility with cylinder manufacturer specifications. The temperature range from -40 to +85°C, the operating pressures up to 350 bar and the high resistance to vibration and shock make the sensor very robust, a fundamental feature in heavy-duty applications....

MAG100 CANopen fjq]TMAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer Top Sensors Manufacture PRODUCT CODE ■dr .dr Power supply range Active stroke range Dead zone 20 -4= 20 mm only for backwards compatibility 28 4 = CANopen with diagnostics 1 4 = Male connector M12, 5-pin PUR cable 30 cm Cursor type 0 4 = Magnetic cursor 18 x 8 mm - AW2011A anodized 1 4 = Magnetic cursor 18 x 10 mm - AW2011A anodized (1) Not all combinations can be ordered. Please contact TSM for confirmation before placing an order. (2) Redundanted primary measures, acquired by a single...

MAG100 CANopenMAGNETOSTRICTIVE SENSOR ^ Absolute measuring length up to 2.5 m linear position transducer Top Sensors Manufacture TECHNICAL SPECIFICATION - OPERATING PRINCIPLE Measuring range ELECTRICAL CHARACTERISTICS Power supply range The operating principle is based on the magne-tostrictive effect. The application of periodic short current pulses in the magnetosctrictive wire generates an induced magnetic field. The interaction of the magnetic cursor, connected to the moving object in the application, with this field generates a momentary torsional strain on the magnetostrictive wire which...

MAG100 CANopen fjq]TMAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer Top Sensors Manufacture CURSOR TYPES Do not separate the magnetic cursor from the sensor. For correct operation, each sensor must be mounted in the cylinder with its own supplied cursor. The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162...

MAG100 CANopenMAGNETOSTRICTIVE SENSOR ^ Absolute measuring length up to 2.5 m linear position transducer Top Sensors Manufacture Head seat Magnet seat WARNING: For installation apply a maximum tightening torque of 60 Nm The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com...