Catalogs >
TSM SENSORS SRL >
MAG100 CANopen

MAG100 CANopen
6Pages

Catalog excerpts

MAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer Absolute contactless linear position measurement Designed for installation into hydraulic cylinders High resolution and linearity High shock and vibration resistance Unlimited mechanical life Rod, nipple and flange in AISI 316 Easy installation and field replacement Customizable cursor Position, speed and acceleration measurement 2.5 m Wide temp. range High accuracy Firmware Upgradable The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Open the catalog to page 1

MAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer PRODUCT DESCRIPTION The only external part is the head whose slim profile facilitates installation in confined spaces and allows easy maintenance operations. Its unique design, plus a wide range of cursor configurations, ensure easy installation and full compatibility with cylinder manufacturer specifications. The temperature range from -40 to +85°C, the operating pressures up to 350 bar and the high resistance to vibration and shock make the sensor very robust, a fundamental feature in heavy-duty...

Open the catalog to page 2

MAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer PRODUCT CODE Power supply range Active stroke range Dead zone = 20 mm only for backwards compatibility = CANopen with diagnostics = Male connector M12, 5-pin PUR cable 30 cm Cursor type = Magnetic cursor 18 x 8 mm - AW2011A anodized = Magnetic cursor 18 x 10 mm - AW2011A anodized (1) Not all combinations can be ordered. Please contact TSM for confirmation before placing an order. (2) Redundanted primary measures, acquired by a single logical unit and published on the CANOpen output by one or more PDOs,...

Open the catalog to page 3

MAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer OPERATING PRINCIPLE Measuring range Magnetostrictive resolution Operating pressure Protection class Temperature range Temperature coefficient Head and rod: stainless steel AISI316 Shock resistance Vibration resistance The operating principle is based on the magnetostrictive effect. The application of periodic short current pulses in the magnetosctrictive wire generates an induced magnetic field. The interaction of the magnetic cursor, connected to the moving object in the application, with this field...

Open the catalog to page 4

MAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer CURSOR TYPES Magnetic cursor 18 x 10 mm - AW2011 anodized** Magnetic cursor 18 x 8 mm - AW2011 anodized** **Do not separate the magnetic cursor from the sensor. For correct operation, each sensor must be mounted in the cylinder with its own supplied cursor. The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi ,...

Open the catalog to page 5

MAGNETOSTRICTIVE SENSOR Absolute measuring length up to 2.5 m linear position transducer Head seat Magnet seat WARNING: For installation apply a maximum tightening torque of 60 Nm 6 The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - info@tsmsensors.com - www.tsmsensors.com

Open the catalog to page 6