CABLE EXTENSION TRANSDUCER Absolute measuring length up to 20 m with integrated inclinometer CHARACTERISTICSADVANTAGESmil Measuring range up to 20 m The measuring length suitable for every application Angle and length redundant sensors Designed for harsh enviromental conditions Compact size Reliability and long service life for outdoor applications Linearity up to ±0.6 % FS Firmware upgradable via proprietary bootloader High protection level and wide temperature range Hall effect technology High protection level Reverse polarity protection Wide temp. range The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com

CABLE EXTENSION TRANSDUCER Absolute measuring length up to 20 m with integrated inclinometer PRODUCT DESCRIPTION Excellent repeatability, high IP rating, shock and vibration resistance and electromagnetic immunity makes this transducer suitable for mobile hydraulic applications such as: agricultural vehicles, earth moving machines, construction equipment, articulated arm cranes and aerial work platforms. The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) -...

Absolute measuring length up to 20 m with integrated inclinometer PRODUCT CODE Measurement range Power supply range 1 4 = Male flange connector M12, 5-pin = Redundant linear sensors = Redundant linear & tilt sensors Customization code Not all combinations can be ordered. Please contact TSM for confirmation before placing an order. Redundanted primary measures, acquired by a single logical unit and published on the CANOpen output by one or more PDOs, according to the selected mapping. Standard component. It does not constitute a safety component as defined in the Machinery Directive 2006/42/CE....

CET20 CANopenCABLE EXTENSION TRANSDUCER Absolute measuring length up to 20 m with integrated inclinometer TECHNICAL SPECIFICATION—- OPERATING PRINCIPLE —Construction The core of a draw wire sensor is a bearings mounted drum on which a wire rope is wound. The unwinding of the rope drives the rotation of the drum, thus the linear displacement of the rope is converted into an angular displacement of the drum. By measuring the angle of the drum, the linear displacement of the wire is detected. Caution Exceeding the maximum extension length of the draw wire will lead to damage to the wire and the...

Absolute measuring length up to 20 m with integrated inclinometer ANGLE SENSOR CET20 can be ordered with the optional integrated angle sensor. The single axis tilt sensor allows to detect the angular change around the axis perpendicular to the installation plane. Several user settings are available, such as: • Output range selection ±180° and 0...360° • Direction of rotation (CW/CCW) • Zero point setting (Preset/Offset) • Output filter bandwidth The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered...

CABLE EXTENSION TRANSDUCER Absolute measuring length up to 20 m with integrated inclinometer The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.co