Absolute measuring length up to 12.5 m with integrated inclinometer Top Sensors Manufacture L.4 - DS0001 R04 CET12 CANopen 22/01/2026 CHARACTERISTICS ADVANTAGES Measuring range up to 12.5 m Angle and length redundant sensors Compact size High protection level and wide temperature range The measuring length suitable for every application Designed for harsh enviromental conditions Reliability and long service life for outdoor applications Firmware upgradable via proprietary bootloader Hall effect technology Reverse polarity protection Wide temp. range 7x7 stainless steel rope RoHS compliant The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d'Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com

CABLE EXTENSION TRANSDUCER Absolute measuring length up to 12.5 m with integrated inclinometer PRODUCT DESCRIPTION Excellent repeatability, high IP rating, shock and vibration resistance and electromagnetic immunity makes this transducer suitable for mobile hydraulic applications such as: agricultural vehicles, earth moving machines, construction equipment, articulated arm cranes and aerial work platforms. The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG)...

Absolute measuring length up to 12.5 m with integrated inclinometer Top Sensors Manufacture PRODUCT CODE Power supply range Output type 1 4 = Male flange connector M12, 5-pin X 4 = Redundant linear sensors IR 4 = Redundant linear & tilt sensors Not all combinations can be ordered. Please contact TSM for confirmation before placing an order. Redundanted primary measures, acquired by a single logical unit and published on the CANOpen output by one or more PDOs, according to the selected mapping. Standard component. It does not constitute a safety component as defined in the Machinery Directive...

Absolute measuring length up to 12.5 m with integrated inclinometer TECHNICAL SPECIFICATION Measuring range - OPERATING PRINCIPLE —Construction The core of a draw wire sensor is a bearings mounted drum on which a wire rope is wound. The unwinding of the rope drives the rotation of the drum, thus the linear displacement of the rope is converted into an angular displacement of the drum. By measuring the angle of the drum, the linear displacement of the wire is detected. Caution Exceeding the maximum extension length of the draw wire will lead to damage to the wire and the mechanics. ELECTRICAL...

Absolute measuring length up to 12.5 m with integrated inclinometer Pinout Pinout CAN-GND* * GND and CAN_GND terminals are internally connected to each other and identical in their function PIN MARKED n.c. MUST NOT BE CONNECTED ANGLE SENSOR CET12 can be ordered with the optional integrated angle sensor. The single axis tilt sensor allows to detect the angular change around the axis perpendicular to the installation plane. Several user settings are available, such as: • Output range selection ±180° and 0...360° • Direction of rotation (CW/CCW) • Zero point setting (Preset/Offset) • Output filter...

CABLE EXTENSION TRANSDUCER Absolute measuring length up to 12.5 m with integrated inclinometer The company reserves the right to make any kind of design or functional modification at any moment without prior notice. TSM SENSORS S.R.L. Registered office:Via Roma 110, 24021 Albino (BG) - ITALY Operational Headquarter : Via Alcide De Gasperi , 6/8 25030 Zocco d’Erbusco (BS) - ITALY P.IVA: 04334290162 - C.F: 03757080985 TEL. +39 030 7001376 - [email protected] - www.tsmsensors.com