Storage Silos

Storage Silos

Storage Silos

Product catalog summary
Overview: TSM offers a range of storage silos with capacities from 840 to 9,830 cubic feet. These silos are designed with two cone angle options: 45º for free-flowing pellets and 60º for powders and non-free-flowing materials. The silos feature a 12” diameter opening with a 16” square mounting flange and are epoxy coated inside to prevent contamination.
Specifications:
  • Capacities: 840 to 9,830 cubic feet
  • Construction: Welded, Bolted, and Corrugated options in Carbon Steel, Aluminum, or Stainless Steel
  • Cone Design: 45º or 60º
  • Finish: Epoxy interior and enamel exterior for welded silos
  • Roof: 10º dome with 20" manway/vent
Features:
  • Anchor bolts included
  • Hinged access door
  • Optional OSHA compliant ladder, platform, and cage
  • Pressure/vacuum relief valve, fill lines, and level sensors available
Installation: Silos are delivered via dedicated truck and installed using a crane on a customer-prepared concrete pad. Accessories are connected for immediate use.
Options: Additional features include load cells, air pads, angel hair traps, drawer magnets, and turn-key installation services.
Contact Information: TSM has offices in Europe, Asia-Pacific, China, and North America, providing contact details for general inquiries, sales, and support.
See more

Catalog excerpts

Storage Silos-1

Solutions Through Partnership Bulk Storage Solutions • Capacities ranging from 840 to 9,830 cubic feet • Welded, Bolted and Corrugated Silos • Carbon Steel, Aluminum or Stainless Steel Construction • Anchor Bolts Included • 12" diameter opening with standard 16" square mounting flange • Hinged 3' 6" x 6' 8" Louvered Access Door in Skirt • Epoxy Interior Finish with Enamel Exterior Finish on all Welded Silos. • 10° Roof Dome with 20" Manway/Vent TSM's Storage Silos are available in sizes ranging from 840 to 9,830 cubic feet. The silos are available with two cone angle options; 45° cones are used for free flowing pellets and 60° cones are used for powders and non-free flowing flake or regrind materials. Silos are provided with a 12" diameter opening with an industry standard 16" square mounting flange. The inside of the silos are epoxy coated to prevent material contamination. The exterior of welded silos are primed and enamel coated. TSM's Storage Silos are shipped to the customers site on a dedicated truck. A crane is used to set the silo in place on the customer poured concrete pad. Once all the accessories are connected, the silo will be ready for immediate use. Please call your local TSM representative to set up an appointment to discuss all your bulk storage and handling needs. • OSHA Compliant Ladder, Platform and Cage with Fall Arrest System • Deck Perimeter Handrail with toe-board • Crossover Walkways • Pressure/Vacuum Relief Valve • Fill Lines • Point level sensors • Low Level Alarm Panel • Continuous level sensors • Silo Inventory Monitoring Panel • Slide Gate Shut-off • Vacuum Take-off boxes • Load Cells • Angel Hair trap • Drawer Magnet • Turn-key installation

 Open the catalog to page 1
Storage Silos-2

Solutions Through Partnership Bulk Storage Solutions • Based on 25° angle of repose of material • For overall height of silo, add 44" for handrail • Silo weight does not include accessories • Capacities of silos will be reduced for 60° cones • Assumes 30" ground clearance from discharge flange Full Installation Services Silo Mounted on Load Cells Silo Outlet with Slide Gate and Vacuum Take-off Box European Office (Headquarters) TSM North America Regional Office TSM Inc. Asia-Pacific Regional Office China Regional Office TSM Control Systems, Finnabair Industrial Estate, Dundalk, Co. Louth, General:...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.