1. Catalogs
  2. TSI
  3. Filter Testing for Air Filters and Filter Media - Borchure

Filter Testing for Air Filters and Filter Media - Borchure

Filter Testing for Air Filters and Filter Media - Borchure
1 / 12 PagesView full catalog

Filter Testing for Air Filters and Filter Media - Borchure

Product catalog summary
Introduction
The document emphasizes the critical role of air filter testing, referencing the World Health Organization's air quality guidelines and the growing use of respiratory masks. It underscores the necessity for standardized testing to ensure the effectiveness of these protective devices.
Standards and Regulations
It outlines various international standards for testing different types of filters, including respiratory filters, air cleaners, HEPA and ULPA filters, and ventilation filters. Key standards mentioned are US 42 CFR 84, EN 143/149, and ISO 16900-3.
TSI's Testing Solutions
TSI offers automated filter testers (AFTs) that improve testing efficiency and reduce costs. These testers provide precise measurements of filter resistance and efficiency. TSI also supplies components for custom systems, such as aerosol generators and particle counters.
Automated Filter Tester Model 8130A
The 8130A model is an enhanced version of the 8130, featuring improvements in maintenance, user interface, and testing efficiency. It supports both salt and oil testing and is ergonomically designed.
HEPA and ULPA Filter Testing
The Model 3160 is detailed for measuring pressure drop and fractional filter efficiency for HEPA and ULPA filters, complying with EN 1822 and ISO 29463 standards, and offering high sensitivity measurements.
Air Cleaner Testing
TSI provides components for air cleaner test systems that adhere to AHAM standards, including aerosol generators and particle sizers.
Ventilation Filter Testing
Standards such as ASHRAE 52.2 and ISO 16890 are used for ventilation filter testing. TSI offers components that focus on particle generation, sampling, and measurement to meet these standards.
Component Filter Test System (CFTS)
The CFTS Model 3150 is designed for applications not covered by automated testers, offering flexibility and integrating various components for comprehensive filter testing.
Conclusion
TSI provides a wide range of instruments and components for filter testing, ensuring compliance with international standards and enhancing testing efficiency.
Overview
The document lists particle generators, conditioners, detectors, and sizers supported by the CFTS system, along with their respective models. It also outlines the standards and regulations for air and gas filter testing, specifying necessary components for compliance.
Particle Generators
Various models of particle generators are listed, including the 3076 Constant Output Generator and 8108 Large Particle Aerosol Generator, each designed for specific applications.
Particle Conditioners
Models such as the 3077(A) Aerosol Neutralizer and 3087 Advanced Aerosol Neutralizer are highlighted, noting their radioactive and non-radioactive properties.
Particle Detectors and Sizers
Models like the 3330 Optical Particle Sizer and 3750 Condensation Particle Counter are essential for measuring particle sizes and concentrations.
Standards and Regulations
A detailed table outlines various filter types and corresponding standards, such as ASHRAE 52.2 for ventilation and ISO 29463-3 for HEPA-ULPA media, specifying required components for testing.
Contact Information
TSI Incorporated provides contact details for regions including the USA, UK, France, Germany, India, China, and Singapore.
Additional Resources
For more information on filter testing, readers are directed to visit tsi.com/filter-testing/.
See more

Catalog excerpts

Filter Testing for Air Filters and Filter Media - Borchure-1

UNDERSTANDING, ACCELERATED FILTER TESTING FOR AIR FILTERS AND FILTER MEDIA Learn more at www.tsi.com

 Open the catalog to page 1
Filter Testing for Air Filters and Filter Media - Borchure-2

TRUSTED BY FILTER MANUFACTURERS AROUND THE GLOBE The World Health Organization (WHO) stated “In 2016, 91% of the world population was living in places where the WHO air quality guidelines levels were not met.*" At the same time, there is increasing awareness about the health effects of inhaling higher concentrations of particles. This has caused an increased use of respiratory masks for protection in daily life, at workplaces, in healthcare, by firefighters, etc. In order to ensure the quality of these protective respiratory masks and filters, worldwide standards are in place to ensure reproducible...

 Open the catalog to page 2
Filter Testing for Air Filters and Filter Media - Borchure-3

(Model 3330 Optical Particle Sizer, Condensation Particle Counters) with the flexibility to meet your filter testing needs. The components can be controlled with the Component Filter Test Several hundred Automated Filter Testers are being used worldwide. System (CFTS Model 3150) that consists of software and a hardware They have a proven track record of durability, reliability, and minimal module to collect data from the TSI particle instruments. This off- maintenance. Additionally, all filter testers are backed by TSI’s the-shelf modular platform is pre-configured to work with the TSI commitment...

 Open the catalog to page 3
Filter Testing for Air Filters and Filter Media - Borchure-4

RESPIRATORY FILTER TESTING Meet your standards and achieve your goals with the Maintenance and time saving benefits of the 8130A Automated Filter Tester Model 8130A Our customers told us that saving time and costs were their top The 8130A enables the testing of respirator filters, disposable priorities. They asked us to reduce tester downtime and slowdowns. filtering face pieces, and a wide assortment of filter media to meet We listened, and improved the 8130A to make maintenance not only the requirements of many different standards. It provides salt and quicker, but also easier. Here are a few...

 Open the catalog to page 4
Filter Testing for Air Filters and Filter Media - Borchure-5

HEPA AND ULPA FILTER TESTING HEPA and ULPA filters are used in hospitals, operating rooms, laboratories, clean rooms and other places that require low concentrations of particles and bacteria. Filter quality is measured by determining the fractional filter efficiency (or penetration) and the most penetrating particle size (MPPS). Measure filter performance at individual particle sizes with highest sensitivity The model 3160 determines the pressure drop and fractional filter efficiency at different particle sizes in order to obtain the MPPS of HEPA and ULPA filters and filter media. The system...

 Open the catalog to page 5
Filter Testing for Air Filters and Filter Media - Borchure-6

a EN versions (for equivalent results to EN 143 standard) available (8130A-EN) b EN version CMD and GSD are different. See 8130A spec sheet for more information c Efficiencies higher than 99.9999% require longer than typical testing times d Aerosol abbreviations: DOP (dioctyl phthalate), PAO (polyalpha olefin), DEHS (di-ethylhexyl sebacate) Automation interface for model 8130A The automation interface enables remote controlled operation of the 8130A via the communication port. It provides a straightforward integration of the 8130A into a PLC-driven automated production line for fully automated...

 Open the catalog to page 6
Filter Testing for Air Filters and Filter Media - Borchure-7

AIR CLEANER TESTING People in industrialized countries spend most of the day indoors. TSI provides components for air cleaner test systems, most of which Airborne particulates (solid particles or liquid droplets) are either are listed in Annex A of the AHAM standard. Some component transported indoors from outdoor environments, or the particles examples include: directly result from indoor sources like smoking, cooking, housework + Model 3400A Fluidized Bed Aerosol Generator and many more. Indoor measured particle concentrations can be + Model 3012 Aerosol Neutralizer very high in cities or from...

 Open the catalog to page 7
Filter Testing for Air Filters and Filter Media - Borchure-8

VENTILATION FILTER TESTING Air filters used for general ventilation are widely used in heating, ventilation and air-conditioning (HVAC) applications in buildings. Similar filters are also used in cabin air filtration and engine air intake filtration. Here these filters lower the concentration of particles and improve the (indoor) air quality. When design engineers and maintenance personnel choose which filter type to use, they depend on specifications that are based on standardized tests. Currently two main standards are used: ASHRAE 52.2 in the United States and ISO 16890 which replaced EN 779....

 Open the catalog to page 8
Filter Testing for Air Filters and Filter Media - Borchure-9

The World Health Organization (WHO) and other environmental Standards specify requirements that the test equipment must authorities have called attention to the negative impact of particulate meet to determine filter efficiency as a function of particle size. TSI matter (PM) on human health (World Health Organization 2002; focuses on providing high-end components necessary to comply with Dockery et al., 1993). In order to work towards testing ventilation these requirements. Filtration professionals can use the following filters in a manner that reflects the nature (and terminology) of PM components...

 Open the catalog to page 9
Filter Testing for Air Filters and Filter Media - Borchure-10

BRINGING IT ALL TOGETHER COMPONENT FILTER TEST SYSTEM Complete Solution TSI offers a CFTS (Model 3150) for those applications that are not As an instrument manufacturer, TSI builds many of the instruments possible with TSI’s automated testers. that can be used in these types of systems. Some components of these For the wide range of flow rates and particle sizes needed to meet systems are best obtained locally (such as sheet metal work and the requirements of the many filter testing standards and research welding needed to build duct segments) or from suppliers that needs, an automated tester...

 Open the catalog to page 10
Filter Testing for Air Filters and Filter Media - Borchure-11

TSI has a wide range of particle generators, conditioners, detectors and sizers. The following is a list of some models that are currently available and supported with the CFTS system. As needs for other products are identified and new products are developed, TSI will add to this list at www.tsi.com. Constant Output Generator Large Particle Aerosol Generator Six-jet atomizer Oil Droplet Generator (Laskin Nozzle) Salt Generator Oil Generator Salt Generator Oil Generator Aerosol Neutralizer (Radioactive) Aerosol Neutralizer (Radioactive) Advanced Aerosol Neutralizer (Non-Radioactive) Electrostatic...

 Open the catalog to page 11

All TSI catalogs and technical brochures

  1. 5000 SERIES

    4  Pages

  2. DP-Calc 5825

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.