5000 SERIES MASS FLOW MULTI-METER THERMAL MASS FLOW METERS DESIGNED FOR GAS FLOW MEASUREMENT TSI thermal mass flow meters incorporate a proprietary platinum film sensor design for measuring gas flows in applications demanding fast response, low pressure drop, and high accuracy over a wide flow range. The 5000 Series incorporates bidirectional flow sensing, color touchscreen display, configurable tube end adapters, and companion PC software for all models. Advanced models can integrate mass flow, absolute pressure, temperature, volume, differential pressure, and humidity measurements into a single device as well as provide options for higher flow accuracy, data logging, or humidity compensated flow measurements. + millisecond bi-directional flow response 4 + esearchers, engineers, designers, and scientists use R + igh accuracy (±2% of reading, ±1.7% of reading optional) H TSI gas flow meters in a variety of applications such as: + ow pressure drop minimizes back pressure L — Product Development + ide dynamic operating range (1000:1 turndown ratio) W + ultiple gas calibrations available, user-selectable M — Quality Assurance + easure up to 6 parameters - flow rate, absolute pressure, M temperature, volume, differential pressure, and humidity + emperature and pressure compensated, T optional humidity compensation + .8 inch color touchscreen operation 2 + isplay four measurement parameters simultaneously D + onfigurable tube end connectors C + ata logging options D + SB power and data communications U + IST-traceable Calibration Certificate included N + ll meters come with power supply, cables, tube end connectors, A inlet filter, and FLO-Sight™ companion PC software UNDERSTANDING, ACCELERATED

5300 Series High Flow The 5300 Series is TSI’s high flow thermal mass flow meter. The 5300 Series provides the ability to measure high flows with an ultra low pressure drop, measuring up to 300 L/min while minimizing flow back pressures and their impact on your system. These flow meters also have a lightweight, compact form factor when compared to other instruments that measure at Flow Measurement similar flow rates. The 5300 Series is designed as a general purpose flow meter and is optimized Gas Air, O2, CO2, N2* Calibrations (user selectable) for applications within the respiratory equipment...

The 5200 Series is TSI's low flow thermal mass flow meter, These flow meters provide increased resolution and accuracy at flow rates under 1 L/min. The 5200 Series flow body is designed with a reduced internal volume to minimize circuit dead space and provide highly accurate volume measurements. Low flow meters from TSI are used as a flow reference for the calibration of sampling instrumentation as well as many other low flow applications. 5200 Series Low Flow Flow Measurement Gas Air, O2, CO2, N2* Calibrations (user selectable) —10 mm and 0.37 5 inch with Filter —0.25 inch with Filter Accuracy...

Temperature Measurement Range -10 to 50°C Accuracy ±1°C at flows > 1 Std L/min (in forward direction only) Response <= 75 ms to 63% of final value for step change Absolute Pressure Measurement Range 50 to 200 kPa Response <= 4 ms to 63% of final value for step change Units Pa, hPa, kPa, mbar, PSI, mmHG, cmH2O, inH2O Accuracy ±0.5% of reading or 0.15 cmH2O, whichever is greater Response <= 4 ms to 63% of final value for step change Units Pa, hPa, kPa, mbar, PSI, mmHG, cmH2O, inH2O Relative Humidity Measurement Range 10-90% RH Response <= 3 seconds to 63% of final value for step change Totalizer...