5000 Series Mass Flow Multi-Meter Spec Sheet EN
4Pages

{{requestButtons}}

Catalog excerpts

5000 Series Mass Flow Multi-Meter Spec Sheet EN - 1

5000 SERIES MASS FLOW MULTI-METER THERMAL MASS FLOW METERS DESIGNED FOR GAS FLOW MEASUREMENT TSI thermal mass flow meters incorporate a proprietary platinum film sensor design for measuring gas flows in applications demanding fast response, low pressure drop, and high accuracy over a wide flow range. The 5000 Series incorporates bidirectional flow sensing, color touchscreen display, configurable tube end adapters, and companion PC software for all models. Advanced models can integrate mass flow, absolute pressure, temperature, volume, differential pressure, and humidity measurements into a single device as well as provide options for higher flow accuracy, data logging, or humidity compensated flow measurements. + millisecond bi-directional flow response 4 + esearchers, engineers, designers, and scientists use R + igh accuracy (±2% of reading, ±1.5% of reading optional) H TSI Gas Flow Meters in a variety of applications such as: + ow pressure drop minimizes back pressure L — Product Development + ide dynamic operating range (1000:1 turndown ratio) W + ultiple gas calibrations available, user-selectable M — Quality Assurance + easure up to 6 parameters with a single instrument M + isplay four measurement parameters simultaneously D + .8 inch color touchscreen operation 2 — Field Service + onfigurable tube end connectors C + ata logging options D + SB power and data communications U + 0 Point NIST-traceable Calibration Certificate included 1 + emperature and pressure compensated, T optional humidity compensation + omes with basic FLO-Sight™ PC software C

Open the catalog to page 1
5000 Series Mass Flow Multi-Meter Spec Sheet EN - 2

5300 Series High Flow The 5300 Series is TSI's high flow thermal mass flow meter. The 5300 Series provides the ability to measure high flows with an ultra low pressure drop, measuring up to 300 l/min while minimizing flow back pressures and their impact on your system. These flow meters also have a lightweight, compact form factor when compared to other instruments that measure at similar flow rates. The 5300 Series is designed as a general purpose flow meter and is optimized for applications within the respiratory equipment market. Calibrations (user selectable) Range 0 to ±300 Std L/min...

Open the catalog to page 2
5000 Series Mass Flow Multi-Meter Spec Sheet EN - 3

The 5200 Series is TSI's low flow thermal mass flow meter. These flow meters provide increased resolution and accuracy at flow rates under 1 L/min. The 5200 Series flow body is designed with a reduced internal volume to minimize circuit dead space and provide highly accurate volume measurements. Low flow meters from TSI are used as a flow reference for the calibration of sampling instrumentation as well as many other low flow applications. —10 mm and 0.375 inch with Filter —0.25 inch with Filter Calibrations (user selectable) Range 0 to ±30 Std L/min Accuracy (by model number) 5200, 5210,...

Open the catalog to page 3
5000 Series Mass Flow Multi-Meter Spec Sheet EN - 4

Temperature Measurement Range -10 to 50°C Accuracy ±1° C at flows > 1 Std L/min Response <= 75 ms to 63% of final value for step change Absolute Pressure Measurement Range 50 to 200 kPa Response <= 4 ms to 63% of final value for step change Units Pa, hPa, kPa, mbar, PSI, mmHG, cmH2O, inH2O Power Supplied through USB-C port 5.0 VDC ±5%, 500 mA maximum Burst Pressure Tested to 690 kPa without rupture. DO NOT exceed 690 kPa. Digital Output USB, RS-232 Serial using an optional USB-A to RS232 converter cable Display 2.8 inch Color LCD Touchscreen Internal Storage 1 GB storage, max 20 datalog...

Open the catalog to page 4

All TSI catalogs and technical brochures

  1. 5000 SERIES

    4 Pages

  2. DP-Calc 5825

    2 Pages