To go from left to right. Pressure-shock resistant product separator for use in category II 1GD (shown without the housing door and the cover of the housing for filter head). Filter apparatus to protect the exhauster the dust container can be changed quickly. Stand filter apparatus with dust container for use in potentially explosive areas. Customised solutions The rectangular filter can be integrated directly in the machine, e.g. in a can coating plant to remove dust by suction. The high cycle time requires the perfect functioning of the filter to avoid interruptions in production. This filter with a filter area of 1,5 m2 has been designed for an air volume of 90 m3/h. Polyester was selected as filter medium. The bursting device on the clean air side reduces the explosion pressure to 1 bar. The product separator, (picture top left) used when product is transported pneumatically from a silo to a weighing machine and is highly suitable for product separation and small batch storage. The discharge is regulated by a rotary valve, spiral conveyor, flap or slide gate. This example shows a filter apparatus with a housing diameter of 530 mm. Star filters with ts-systemfilter gmbh Gänsäcker 9 D-74744 Ahorn-Berolzheim Fon: +49 6296 88-0 Fax: +49 6296 88-55 info info@ts-systemfilter.de www.ts-systemfilter.de a filter area of 6,3 m2 made of cellulose are implemented in this case. As a standard, all filter units of the series 05 can be equipped with a filter area of up to 22 m2. The filterapparatus protects the exhauster from too much dust exposure and collects the deposited product in the 80-liter dustcontainer. The three leg arrangement allows easy changing of the dust-container. Optionally rollers can be attached to it. The stand filter apparatus with a dust container (picture top right) can be used for the de-dusting of powder coating equipment. The dust produced in the coating process quickly disappears inside the filter. Both metal or plastic models of the dust container are available. For use in potentially explosive areas metal is used. When height is a problem the low frame option is available. Well proven for more than 25 years ts-systemfilter´s modular system leaves nothing to be desired for the individual design of your filter apparatus. Slide rule for planning the filter apparatus. Rectangular filter apparatus for integration into a can coating plant.

Internationally patented valve-membrane patent no. DE 38 37 366 1, EP 0367287, US 5,108,067. Space-saving jet with optimal leads for compressed air. Pressure-relief on the clean air side to prevent the emission of dust and diversion of zones in case of explosion. Regeneration unit of the series 03 with differential pressure control for use in dust Ex-zone 20. ts-systemfilter product range Since 1978, ts-systemfilter gmbh has been developing filter units for process engineering. More than 55 innovations have been patented during this period of time. The filter units made by ts-systemfilter gmbh separate...