video corpo

DRAW FRAMES
74Pages

{{requestButtons}}

Catalog excerpts

DRAW FRAMES - 1

Trutzschler spinning PRODUCTS AND TECHNOLOGIES DRAW FRAME

Open the catalog to page 1
DRAW FRAMES - 2

CONTENT 4 Draw frames: The true way to your yarn quality 20 Autoleveller draw frames 42 Breaker draw frames 54 Integrated Draw Frame IDF 2 72 Disclaimer

Open the catalog to page 2
DRAW FRAMES - 4

The true way to your yarn quality On the way to yarn quality and economic efficiency, spinning mills are facing increasing challenges: shortage of specialists, high flexibility in production, optimal application of resources, etc. Since the foundation of our company we have been using our values to offer you what is of importance: “The true way to your yarn quality”. We are continuously developing new technological solutions that allow you to address the rapid market changes, thus ensuring the success of your business. To support you in pursuing “The true way to your yarn quality”, we are...

Open the catalog to page 4
DRAW FRAMES - 5

Key positions where resources are conserved: • Optimal temperature control of the top roller bearings - gentle to coatings and long service life • 24 h cleaning intervals thanks to 6 times larger filter box • 53 % savings potential for energy costs of the central filter system • High component uniformity between all draw frame types • 20 % less floor space of TD 10 • High level of efficiency due to the TWIN-but-independent concept of the breaker draw frames. • Optimised temperature behaviour of electronic power components Innovative, self-optimising technology • Self-adjusting lap...

Open the catalog to page 5
DRAW FRAMES - 6

Product portfolio For the first time, the new JUMBO CAN format with 1,200 mm diameter was introduced for short staple spinning. This reduces the number of can transports and significantly improves the efficiency of the downstream Superlap or autoleveller draw frame. The Breaker Draw Frame TD 9T The Truetzschler Draw Frame TD 9T is a double head draw frame with focus on saving space and economical, reliable production. If required, it is also available as single TD 9 version. Thus, each even and uneven number of drafting heads is implementable. The Truetzschler draw frame types are as...

Open the catalog to page 6
DRAW FRAMES - 7

Product portfolio The new Autoleveller Draw Frame TD 10 With an average of 20 % less space requirement than the competition, the draw frame sets a new benchmark for compactness. In combination with the Truetzschler remote display T-LED, the intelligent SMART CREEL offers an unprecedented level of functional reliability and more comfort for the operator and spinning mill manager. The special Autoleveller Draw Frame TD 10-600 for combing This version of the TD 10 was developed for use downstream from the comber. Optimisation of the control algorithms to the typical application range of 450 -...

Open the catalog to page 7
DRAW FRAMES - 8

Drafting system technology The drafting zone width can be simply and quickly adjusted since top rollers, top roller supports and drafting system cylinders form a unit that is automatically adjusted as well.

Open the catalog to page 8
DRAW FRAMES - 9

Drafting system technology Drafting system technology All Truetzschler draw frame types TD 7, TD 9T and TD 10 as well as the Comber TCO 12 are equipped with the same reliable 4-over-3 drafting system. Reliable drafting system components • 4-over-3 drafting system with reduced deflection angle • Adjustable pressure bar for controlled guidance of even short fibers • Pneumatically loadable top rolls • Self-adjusting lap monitoring • Patented bearing technology for minimal heat development The unique arrangement of the drafting system components with a 30 % smaller deflection angle results in...

Open the catalog to page 9
DRAW FRAMES - 10

Top roller bearing system Patented top roller bearing system Our patented top roller bearing systems have been in use successfully for more than a decade. The picture foreground shows Truetzschler's patented top roller bearing system with self-centring fastening system. In contrast to standard fastening (picture background), there is no wear of the top roller shafts or top roller bearings during mounting or removing. A typical Truetzschler development for the heart of every drafting system: • High accuracy of fit and optimum centering for an error-free drafting process • High process...

Open the catalog to page 10
DRAW FRAMES - 11

Top roller bearing system / sliver coiling Pneumatic top roller load Optimal individual and infinitely variable top roller load settings – adapted to various applications – are possible same as before. The TD  10 allows exact pressure settings via the display directly on the drafting system. Software limits prevent incorrect settings and thus improve the lap behaviour. This, in addition to the automatic relief of the top rollers during standstill, preserves the coatings and extends the service life. The simple reproducible settings result in demonstrably improved draw frame sliver quality....

Open the catalog to page 11
DRAW FRAMES - 12

SMART CREELThe new perfection with intelligent individual sliver detection Individual sliver sensor in SMART CREEL The new individual sliver sensors in the creel reliably detect sliver breaks, as a distinction can be made between motionless sliver, no sliver and running sliver. In contrast to contact roller detection, the optical Truetzschler sensors protect against operating errors, as they function even when the pressure rollers are not used. The desired doubling is simply entered via the software. This is particularly useful in ensuring the correct blend, as no sliver can be omitted. The...

Open the catalog to page 12
DRAW FRAMES - 13

One idea makes the difference: separate drive with convincing advantages. SMART CREEL In connection with the new Truetzschler remote display, it is possible to remedy sliver breaks effectively and quickly. In case of a sliver break, the T-LED automatically switches over and indicates the position of the sliver break in the creel.

Open the catalog to page 13
DRAW FRAMES - 14

Truetzschler remote display T-LED Intuitive and efficient machine operation With the Truetzschler remote display T-LED, the quality is always in view. Here you can see the visualisation of the sliver count variation A % with freely select able quality limits. T-LED makes machine statuses visible throughout the spinning mill. Thanks to the multicoloured LEDs, various operating statuses can be indicated. The LED bar, which can be seen from both sides, allows visualisation in front and behind the machine. In automatic mode, specific information on certain parameters are clearly visible during...

Open the catalog to page 14

All Trutzschler catalogs and technical brochures

  1. COMBING

    54 Pages

  2. CARDS

    62 Pages

  3. BLOW ROOM

    90 Pages

  4. Filament

    36 Pages

  5. Nonwovens

    52 Pages

  6. MO40

    6 Pages

  7. TD-DL

    4 Pages

  8. T-TUNING

    2 Pages

  9. Tuning

    4 Pages

Archived catalogs

  1. T-DATA

    24 Pages

  2. T-DATA

    24 Pages