• Type: ITQ 008
• Torque: 80 Nm
• Duty Cycle: S2 50%
• Operating Time: 16/14 seconds (50 Hz/60 Hz)
• Max Bore Size: 17 mm
• Rated Current: 0.52 A (1 phase, 220V)
• Motor Insulation Class: E
• Weight: 3.5 Kg

The actuator is designed for ON/OFF automation of small ball valves, plug valves, and dampers. It features a self-locking combination of spur and worm gears, a specially designed induction motor with high starting torques, and thermal protection. It includes external mechanical stopper bolts and allows manual operation via a wrench directly to the gearbox. The device is compact and lightweight, with a standard supply voltage of 1 phase 230V, and optional voltages available.

• PK: Potentiometer kit with output signal 0-1 KΩ for continuous valve position feedback.
• CT: Current transmitter with output signal 4-20 mA, zero/span adjustment, and convertible DIP switch (4 wire to 2 wire).
• RPC: Remote position controller with input signals (4-20 mA, 0-10VDC, 2VDC, 1-5VDC, 0-5VDC) and output 4-20 mA. Features auto-calibration and reverse operating direction.

• Enclosure: IP67, O-ring sealed
• Main Power Supply: 220 VAC / 1 phase / 50/60 Hz
• Duty Cycle ON/OFF: S2 40%
• Motor: Induction motor
• Duty Cycle Modulating: S4 50%, 1200 starts/hour
• Limit Switches: 4 pcs. for open/close
• Space Heater: 3 W
• Mounting: ISO F05/F07, 17x17 mm square female shaft
• Travel Angle: 90° ± 10° by adjustable mechanical stopper
• Cable Entries: 2 – M20 x 1.5
• External Coating: Anodized and dry powder polyester
• Ambient Temperature: -20°C to +70°C
• Ambient Humidity: 90% RH max.
• 17x17 mm double square female shaft
• Cam Set for Limit Switch
• Manual Operation
• Terminal Strip: 22 strips