A GOOD START WITH TRUSTED T1 VERSION
4Pages

help documents A GOOD START WITH TRUSTED T1 VERSION Follow these steps Log in to the Trusted Data Portal Visit trustedglobal.com and click LOG IN to access the Trusted Data Portal and manage your device(s). New users are sent login information in an e-mail from Trusted A/S. Edit your device settings to fit your use case Navigate to your device(s) and click EDIT to set up a transmission schedule that fits your needs. Configure as needed. Updated configurations will be sent to the device(s) upon its next transmission. Activate your T1 device before mounting To activate, PULL OUT THE ATTACHED SLIP that sits between the device an the pre-installed batteries. Wait 5 minutes. Apply a magnet to the symbol until the LED flashes red to force the first transmission. See more below. Mount your device on your asset Mount the device away from potential hazards and in a discreet place to avoid attracting attention. Aim to secure optimal conditions for connectivity of GSM and GPS signals whenever possible.

First login Log in to the Trusted Data Portal Visit trustedglobal.com and click LOG IN to access the Trusted Data Portal and manage your device(s). New users receive login information in an automated e-mail from Trusted A/S. Upon your first login, you must accept the TRUSTED DATA PROCESSING AGREEMENT. Hereafter you will be directed to a map of your units. A pop-up will invite you to keep connected with your Trusted data tracking solution by accepting communication about updates and news from Trusted A/S. Navigate within the Trusted Data Portal by clicking items in the top menu. Basic...

Triggers: Log or Transmission. A TRIGGER activates the individual sensors in your device. It tells the device to detect and record all instances of any input to this sensor under the circumstances you specify. To turn on, choose either LOG or TRANSMISSION. When set to LOG, your device will record and store the sensor data internally and send it at the next scheduled transmission. LOG is sufficient in most use cases and recommended because it is most energy-effective. When set to TRANSMISSION, data will be sent immediately when recorded. Use TRANSMISSION if you want data from any specific...

Multi edit Most of the settings above can be made to entire groups of devices at once. Click MY UNITS in the top menu and navigate to a group of devices. Click the large tile to see a list of devices. Select and click EDIT at the bottom. Choose from the dropdown menu SELECT SETTING. Configure and click SUBMIT CHANGES to save. Activate your T1 device Hardware activation process To activate, pull out the attached slip that sits between the device and the pre-installed batteries. Wait 5 miutes. Then apply a magnet to the symbol until the LED light flashes red continuously. This will force a...