TruMicro Series 7000

1 / 2 PagesView full catalog

TruMicro Series 7000

Product catalog summary

Laser Parameters

Average Output Power: TruMicro 7060 offers 1000 W, while TruMicro 7070 provides 2000 W.
Beam Quality: Both models have a beam quality of 10 mm▪mrad, which varies based on the optical laser cable used.
Wavelength: Both lasers operate at a wavelength of 1030 nm.
Pulse Duration: The pulse duration for both models is 30 ns.
Maximum Pulse Energy: Both models deliver a maximum pulse energy of 100 mJ.
Repetition Rate: The minimum repetition rate is 5 kHz for both models. The maximum repetition rate is 100 kHz for TruMicro 7060 and 250 kHz for TruMicro 7070.
Minimum Laser Light Cable Diameter: Both models require a minimum diameter of 300 μm.

Structural Design

Dimensions for Basic Device Size (W x H x D): Both models have dimensions of 1340 mm x 1430 mm x 725 mm.
Dimensions for Extended Device Size (W x H x D): Both models have dimensions of 1340 mm x 1475 mm x 1040 mm.

Catalog excerpts

TruMicro Series 7000 Technical data

Open the catalog to page 1

LASER PARAMETERS Short and ultrashort pulse lasers 2000 W AVERAGE OUTPUT POWER BEAM QUALITY 10 mm▪mrad , depends on the optical laser cable that is used 10 mm▪mrad , depending on the laser light cable used PULSE DURATION MAXIMUM PULSE ENERGY MINIMUM REPETITION RATE MAXIMUM REPETITION RATE MINIMUM LASER LIGHT CABLE DIAMETER DIMENSIONS FOR BASIC DEVICE SIZE (W X H X D) DIMENSIONS FOR EXTENDED DEVICE SIZE (W X H X D) Technical data STRUCTURAL DESIGN Subject to changes. The details in our offer and order confirmation are definitive. 01/05/2023

Open the catalog to page 2

All TRUMPF lasers catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list