Catalogs >
TRUMETER >
Model 6300

Model 6300
3Pages

Catalog excerpts

The Model 63 range of Electronic Counters with 8 LCD digits bring together features, including optional programmable alert or preset capability. The front utilizes a high-contrast, reflective, 8-digit LCD with 0.32 inch [8mm] digits and seven icons, while at the back end Dry Contact, Low Voltage DC, and High Voltage DC and AC Inputs are available. The Model 63 family is designed with a rugged plastic housing that is qualified to NEMA 4/4X when properly installed using the gasket supplied. In addition, the unit is compliant with CE EMC standards to EN61326:2001 for industrial applications, recognized by UL for U.S. and Canadian safety standards, and it is compliant to European RoHS and WEEE standards. Reflective LCD Display with 8 large (8mm) digits Choice of counter types: ◦◦ Dual Range ◦◦ Dual Counter • Choice of I/O compliment that includes: ◦◦ One or two inputs ▪▪ Switch Input (No voltage) ▪▪ Low DC Voltage (3-30VDC) <2mA ▪▪ High Voltage (20-300VAC or 10-300VDC) <2mA • Internal 15+ year battery • Optional Front Panel Programming for flexible Redi-Alert or Preset functionality Optional Redi-Alert Functions: ◦◦ 3 Redi-Alerts are available with Front Panel Programming option Optional Preset Counter Mode: ◦◦ Available with Front Panel Programming option NEMA 4/4X, 12, and IP66 rated EMC Compliant to EN61326:2001 for industrial environments CE complian

Open the catalog to page 1

• Switch - open circuit or switch closure • Low Voltage DC - Low input is less than 1VDC and High Input is 3 - 30VDC. • High Voltage DC or AC - Low is less than 3VDC or 3VAC. A High Input is either 10 - 300VDC or 20-300VAC. SEL: During normal operation, the displayed counters will be swapped when the SEL switch is pressed and released. During programming, this switch is used to select options. RST: During normal operation, the RST switch is used for front panel reset. During programming, the RST switch is used to enter an option. Counter Operation Any of four different counting methods may...

Open the catalog to page 2

Mounting: Terminations: Weight: Environmental: Humidity: Vibration: Non-operating: Shock: Dielectric: Accuracy: EMC Compliance: Enclosure: Approvals: Environmental Compliance: Panel with clip Terminal block 2 oz. [57g] Temp. (Storage & Operating): -4”F to +140”F [-20"C to +60"C] 0 to 95% RH, non-condensing Operating: 10 to 55 Hz, 0.01” [0.25mm] double amplitude 10 to 55 Hz, 0.03” [0.75mm] double amplitude Operating: 10G's Non-operating: 30G's 1000 VAC 50/60Hz for 1 minute 100% (provided signal meets stated parameters) EN61326:1997 with A1: 1998 & A2:2001 for industrial environments NEMA...

Open the catalog to page 3