Catalogs >
TRUMETER >
Model 15H Hollow Bore

Model 15H Hollow Bore
2Pages

Catalog excerpts

Model 15T Thru-Bore Model 15H Hollow Bore Features • • • • • Very High PerformanceEconomicalEncoder Low Profile1.0" (25.4 mm) Heightand 1.5" (38 mm) Diameter Thru-Bore(sizesup to 0.375"or 10 mm) Simple,InnovativeFlex MountingSystem(GlobalMountingStandards) Up To 12 Pole CommutationOptional(for brushlessmotor control) The Model 15T or 15H offers a high performance feedback solution in a low profile package. Unlike modular or kit encoders, the Model 15 utilizes an integral bearing set, and an innovative flexible mounting system which is much more tolerant to axial misalignment or radial shaft run-out. The slotted flex mounts provide 20 or 30 degrees of rotational adjustment for commutation or index pulse timing. Installation is quick and easy! For brushless servo motor applications, three 120° electrical phase tracks can provide up to 12 pole commutation feedback. The optional 100° C and 120° C temperature options allow servo motors to operate at higher power outputs and duty cycles. The Model 15 provides stable and reliable operation and is an excellent replacement for other manufacturers modular encoders where a high performance solution is desired. Ø1.5" Model 15T/H Ordering Guide Common Applications Servo Motor Control, Robotics, Specialty Assembly Machines, Digital Plotters, High Power Motors Blue type indicates price adder options. Not all configuration combinations may be available. Contact Customer Service for details. MOUNTINg 1.812" (46 mm) Slotted Flex-Mount 1.812" (46 mm) Two Hole Flex Mount 1.142" (29 mm) Slotted Flex Mount 7 1.2795" (32.5 mm) Slotted Flex Mount7 1.575" (40 mm) Slotted Flex Mount7 CYCLES PER REVOLUTION See CPR Options below COMMUTATION 2 N No Commutation A 4 Pole B 6 Pole C 8 Pole E 10 Pole D 12 Pole NUMBER OF CHANNELS3 A Channel A Channel A Leads B Q Quadrature A & B R Quadrature A & B with Index *Contact Customer Service For Availability +Not available in 12V option New CPR values are periodically added to those listed. Contact Customer Service to determine all currently available values. Special disk resolutions are available upon request and may be subject to a one-time NRE fee. Trumeter Company Inc, Deerfield Beach, FL 33442 Channel B Leads A K Reverse Quadrature A & B D Reverse Quadrature A & B with Index MODEL 15T Thru-Bore 15H Hollow Bore Optional Features Leave Blank For Standard Options -20o to +85oC Std IP50 Std OUTPUT TYPE Open Collector9 Push-Pull Line Driver Pull-Up Resistor 9 Open Collector with Differential Outputs9 Available on special request. Additional lead times may apply: OC PP HV PU OD LO Line Driver on ABZ, Open Collector on UVW9 MAXIMUM FREQUENCY Standard F3 Extended See Specifications CERTIFICATION None (Std) CE CE Marked 6 SEALINg IP50 (Std) S1 IP64 for Thru-Bore & Blind Hollow Bore For specification assistance call Customer Service at 954-725-6699 NOTES: 1 Contact Customer Service for additional options not shown. 2 Not available in all configurations, and not available with V1 Input Voltage. Contact Customer Service for availability. 3 Contact Customer Service for non-standard index gating or phase relationship options. 4 For non-standard English cable lengths enter ‘F’ plus cable length expressed in feet. Example: F06 = 6 feet of cable. Frequency above 300 kHz standard cable lengths only. 5 For non-standard metric cable lengths enter ‘M’ plus cable length expressed in meters. Example: M06 = 6 meters of cable. 6 Please refer to Technical Bulletin TB100: When to Choose the CE Option 7 This mount requires button head screws and a modified Hex wrench. Order appropriate Installation Kit listed under Specifications. 8 Not available with commutation. 5-pin not available with Line Driver (HV ,OD, LO) outputs. Additional cable lengths available. Please consult Customer Service. 9 With Input Voltage above 16 VDC, operating temperature is limited to 85o C. 10 Only availabl

Open the catalog to page 1

Model 15T/H 1.811" (46 mm ) Slotted Flex Mount (SF) Model 15T/H 1.811" (46 mm) Two Hole Flex Mount (SA) Model 15T/H Small Diameter Slotted Flex Mounts 1.2795" (32.5 mm): SC* Encoder Length and Diameter are the same as SF and SA mounts detailed above All dimensions are in inches with a tolerance of +0.005" or +0.01" unless otherwise specified Metric dimensions are given in brackets [mm] * Order Appropriate No Charge Mounting and Installation Kit for SB, SC, or SD Option Screws with 0.062" Shortened Hex Wrench Screws with 1.5 mm Shortened Hex Wrench Each kit contains 10 screws for mounting 5...

Open the catalog to page 2