APM Process Meter Easy to Use. Easy to Read. Programmable dynamic backlight color Warning flash User selectable Voltage & Current Combined digital and bar graph display segment curved bar graph display Programmable scale Programmable 4 digit star-burst display Custom messages & annunciators USB port for custom user settings Less than 53mm deep user configurable linearization 2 outputs - digital and analog Full 4 digit readout for accuracy Featuring an acclaimed easy-to-read display and a versatile set of inputs, the Process Meter takes the APM into a wide range of new industrial applications. The programmable scale and custom annunciators mean users can tailor the meter to display their critical parameters exactly how they want, while the dynamic backlighting, in conjunction with setpoints, means operators are visually alerted when a parameter is out of range. The two outputs can be used to control other systems in the process, meaning the APM Process Meter is much more than just a display. Trumeter’s innovative technology brings a greater level of accuracy to the APM range through input signal optimization. By using this technology, accuracy of 0.1% or better is now achieved, allowing for more precise measurement, display and control. Non-linear sensors, such as thermocouples and pressure transducers, can also be used thanks to the new APM Configurator application that allows the user to configure upto 20 points in a non-linear conversion table. Go to www.truAPM.com for further information

Fluid Level Application The APM Process Meter is used to display the volume of fluid in the tank. The 4-20mA analog output from the fluid level sensor is scaled to gallons, and the custom annunciator set to “Gal”, all via the easy-to-use software application. High and low setpoints are configured so that the normal green display will flash red when the tank is too full or empty, thereby alerting the operator. Additionally the APM digital outputs are integrated in to the tank pumping system and the tank is automatically drained or filled if the setpoints are exceeded. Red flashing backlight at...

• 40 segment bar graph display • User-adjustable backlight brightness and color • Large 4-digit display • Large display • Separate Starburst display area for annunciators, custom • Wide viewing angle (horizontal and vertical) messages and alarm information • Custom annunciators • Dynamic backlight color • Display Range (Both Min & Max Values) • Custom annunciators • User-selectable backlight color and intensity • Two independent alarm set-points • Two independent outputs • 4-20mA analog retransmission output INPUT Range (DC) Impedance Accuracy ENVIRONMENTAL Temperature - operating Temperature...