The versatile 9100 multi-function instrument is a multi-preset, totalising counter / ratemeter with backlit display. Simultaneous operation in different modes is now possible with this recent development of the highly successful 9100 multi-function counter. Additional enhancements include 3-line display, more keys, enhanced programming, EEPROM memory avoiding the need for a battery, and on-screen programming prompts in four languages. The 9100 carries out rate measurement, batch counting and totalising simultaneously. Rate mode is signified by an R appearing at the top left hand corner of the display and counting carries on in the background. The first line of the display shows pulses per minute (PPM) unless a prescaler is in use. Key Features • Simultaneously maintains any 3 of the following: Count preset, count pre-warn, batch preset, overspeed, underspeed condition and displays count, total and speed • Counts in any of 7 modes: A-B, A+B, A/B, count and direction and quadrature x1, x2 and x4 • EEPROM retains program and data for 40-years with no power • 3-line Supertwist LCD display viewable from any angle • Easily programmed in English, German, French or Spanish using simple menu structure and 10-key keypad • Counting continues while rate measurement is in progress • Accurate enough for position sensing and robotic control • Displayed values, choice of engineering units and 12 characters of user programmable text can be printed directly from the IBM/Epson compatible serial printer port • Can be powered from 85-265VAC for world-wide use • Multiplying and dividing prescalers enable display directly in the required (engineering) units • Manual, remote and automatic resets available • Remote inhibit and remote keyboard disable • Fast electronic or slow contact closure inputs, all with optical isolation. Contact closure inputs are debounced • Auxiliary 12VDC 100mA power output to power sensor • Environmental protection to IP65/NEMA4X • CE app

Supply Voltage Auxiliary Output Supply Display Backlight Control Preset Points Count Inputs Prescaler Manual Reset Remote Reset Automatic Reset Data Retention Output Relay Operating Temp Storage Temp Environmental Protection 85 - 265VAC or 10 - 26VDC at 100mA 12VDC ± 10% @ 100mA (when operating from AC supply) 2 rows of 6 digits, supertwist LCD with yellow/green LED backlight. Upper row 7mm (0.28in) high indicates count, lower row 4mm (0.16in) high indicates P1 preset point Also Relay Active annunciator Programmable to Always ON, Always OFF or AUTO (ON for 30s following last keypress) User selectable...