This unit counts revolutions on many different types of production machinery. Robustly constructed for continuous operation at high speeds with the main shaft running in double oil impregnated bearings to ensure accurate, long term, trouble free service. It is supplied with a double drive with wing bush, customer configurable reset. Display Base Material Cover Material Drive Shaft Diameter Gearing Bearings Operating Torque White on black, decimals black on white 0.25in (6.4mm) figures Black PC-ABS plastic Grey ABS plastic 0.275 inch (7mm) diameter 1:1, 1:10, 2:1, 3:1, 4:1 as standard. Others on application Bronze, oil impregnated for life 180g.cm (2.5oz.in) at 1:1 gearing Key Features • 6-digit 6.4mm (0.25in) readout • Up to 3000 counts per minute with 1:1 gear ratio • 1:1, 1:10, 2:1, 3:1, 4:1 gearings as standard • Front viewing • Reset to zero • Reset by lever • Customer Configurable Reset Maximum Shaft Speed Maximum Count Speed Operating Temp Storage Temp Environmental Protection Nett Weight 3000 RPM 3000 CPM -10°C to +50°C [14°F to 122°F] -20°C to +50°C [-4°F to 122°F] IP40 200g

Part Number Ordering Chart COUNTER TYPE DRIVE DIRECTION Trumeter (The Americas) 702 S. Military Trail Deerfield Beach, Florida FL 33442, USA Tel: +1 954 725 6699 Email: [email protected] www.trumeter.com Innovative Design Technologies Sdn. Bhd Lot 5881, Lorong Iks Bukit Minyak 1 Taman Perindustrian Iks, 14000 Bukit Tengah Penang, Malaysia Web: www.idtworld.com Tel: + 604 5015700 Email: [email protected]