TROJANUV3000PLUS®
10Pages

{{requestButtons}}

Catalog excerpts

TROJANUV3000PLUS® - 1

Wastewater Treatment

Open the catalog to page 1
TROJANUV3000PLUS® - 2

A reference standard in wastewater UV treatment UV is a simple and cost-effective way to treat wastewater. A key advantage is its ability to treat Cryptosporidium and Giardia, which if released into lakes and rivers increases the potential of contamination in communities that rely on these same bodies of water for their drinking water source and recreational use. The proven infrastructure of the TrojanUV3000Plus has been continuously refined to enhance easy operation. The result is more dependable performance, simplified maintenance and maximized UV lamp output at end-of-lamp life. The...

Open the catalog to page 2
TROJANUV3000PLUS® - 3

Designed for efficient, reliable performance System Control Center (SCC) The SCC monitors and controls all UV functions. Designed by Trojan engineers, the TouchSmart line of controllers offer a full suite of features and functionality. Large, outdoor-rated screens are easy to navigate for rapid monitoring, diagnosis and adjustment of UV system operation. TouchSmart controllers offer SCADA connectivity, dose-pacing control, and data logging for trending and analysis (flow, power, UVT, UV intensity and dose). Programmable Logic Controllers (PLC) are also available. TouchSmart controllers...

Open the catalog to page 3
TROJANUV3000PLUS® - 4

ActiClean Sleeve Cleaning System The system consists of two components: 1. Hydraulic System Center (HSC) 2. ActiClean Wiper Assembly The HSC is mounted close to the channel in a stainless steel enclosure. It contains the pump, valves and ancillary equipment required to operate the cleaning system and links to the extend/ retract hoses of the module wiper drives via a manifold located on the underside of the PDC. A submersible wiper drive on each UV module drives the wiper carriage assembly along the module. Attached wiper canisters surround the quartz sleeves, and are filled with ActiClean...

Open the catalog to page 4
TROJANUV3000PLUS® - 5

Key Benefits TrojanUV3000Plus Reduces operating costs by as much as 30% per year. Long-lasting amalgam lamps and lamp dimming capabilities optimize UV output to manage real-time treatment conditions and maximize system efficiency. Dual-action sleeve cleaning system improves performance and reduces labor costs. The ActiClean automatic chemical/mechanical cleaning system maintains sleeve transmittance of at least 95%, and works online – eliminating the need for removing lamp banks to manually clean sleeves. Integra lamp and sleeve assembly. Lamps and sleeves are preassembled, and factory...

Open the catalog to page 5
TROJANUV3000PLUS® - 6

ActiClean Dual-Action, Automatic Cleaning System Chemical/mechanical cleaning system eliminates sleeve fouling Benefits: • Cleans 50% more effectively than mechanical wiping alone • Operating costs are reduced by maximizing the output of the UV lamps • Lowers capital expenses by reducing equipment requirements • Online operation requires no system shut-down • Large gel canisters require infrequent gel re-fills • Maximizes UV treatment in plants with heavy fouling and high solids The dual-action, chemical/mechanical cleaning with the ActiClean system provides superior sleeve cleaning and...

Open the catalog to page 6
TROJANUV3000PLUS® - 7

Integra Lamp Assembly Simplifies Maintenance • Lamps and sleeves preassembled, and factory sealed together as a single unit • Reduces chance of lamp or sleeve damage during maintenance • O-rings and seals permanently built-in, preventing problems with reassembly and water leaks • Fewer parts to keep track of, remove and reassemble • Clean fresh sleeve every time to ensure the maximum amount of UV light is reaching the water Lamps and sleeves are preassembled, and factory sealed into a single unit with easy screw caps. Amalgam Lamps Require Less Energy Require fewer lamps and reduce O&M...

Open the catalog to page 7
TROJANUV3000PLUS® - 8

Amalgam Lamps Maintain Maximum UV Output Delivers 98% of full UV output after more than one year of use Benefits: Decrease in UV Lamp Output Over Time • Delivers consistent UV output • 20% less decline in UV output after 12,000 hours of use compared to competitive UV lamps • Validated performance assures you of reliable dose delivery and prolonged lamp life The lamps used on the TrojanUV3000Plus system have been independently validated in accordance with standards set in the AwwaRF/NWRI 2003 Guidelines for Drinking Water and Water Reuse to maintain 98% of original output after 12,000 hours...

Open the catalog to page 8
TROJANUV3000PLUS® - 9

Advanced, Self-Contained UV Module Reducing footprint and maintenance Benefits: • Electronic lamp drivers installed in the module eliminate the need for separate external cabinets • Lamp driver enclosures are rated TYPE 6P (IP67) – air/water tight • Module leg and lamp connector have a hydrodynamic profile to reduce headloss • TrojanUV3000Plus lamps are warranted for 12,000 hours • Modular design allows for maintenance on one module without disrupting treatment performance Bioassay Validation Real-world testing ensures accurate dose delivery Benefits: • Validated through microbial testing –...

Open the catalog to page 9
TROJANUV3000PLUS® - 10

System Specifications System Characteristics Typical Applications Wide range of wastewater treatment plants Lamp Type High-efficiency Amalgam Lamp Driver Type Electronic, variable output (60 to 100% power) Input Power Per Lamp Lamp Configuration Horizontal, parallel flow Module Configuration Level Control Device Options Water Level Sensor ALC, fixed weir or motorized weir gate 1 electrode low water level sensor per channel Enclosure Ratings: Module Frame / Lamp Driver Enclosure All Other Enclosures Lamp Driver Cooling Method Installation Location Convection; no air conditioning or forced...

Open the catalog to page 10

All Trojan Technologies Group ULC catalogs and technical brochures