Cooling Incubator with lighting Outside dimensions: Inside dimensions: Temperature Range: Housing Made of stainless steel (Backplane, as well as top and bottom side of the cabinet of galvanised sheet steel). Set of 4 wheels, 2 with brakes. Interior space Made of stainless steel. Cleaning friendly by rounded corners, slippery surface in the interior, meets highest hygiene requirements. Insulation high density foamed-in-place polyurethane, CFC-free Circulation air cooling for rapid and uniform temperature control, reducing temperature gradients to a minimum Door Solid door, supplied as standard with right hand hinge, also available with left hand hinge at no extra cost. Grease resistant magnetic seal. Additionally equipped with one inner glass door. Interior fittings - 4 pcs. Grating-type shelves (dim.: 530x570 mm) (max. 12 shelves possible) - 1 pc cable port Control system located above door. Actual value and setpoint digitally adjustable via membrane push-button. Actual value permanently readable Working range temperature and humidity Temperature: 10°C up to 45°C Temperature accuracy: +/- 2°C (Ill. similar) tritec ® Gesellschaft für Labortechnik und Umweltsimulation mbH Hüttenstraße 9 D-30165 Hannover Homepage www.tritec-klima.com E-mail [email protected] Phone ++49-511/3523508 Fax ++49-511/3521715 technische Änderungen vorbehalten

Cooling Incubator with lighting With the following control units: - Digital thermostat with microprocessor enables PID Auto-tuning controller for temperature and light. - Over-temperature safety thermostat, with pilot light - Under safety temperature limiter, with pilot light - Switch to select direct or programmed temperature - 3-way switch for setting the LUX intensity for lighting (min / ave / max) - Main switch - Indicator lights - Fuses Illumination device Exhaustive illumination of the inner room by 2 x 6 units vertical arranged LED lamps (cool white - approx. 750 x 1250 lux - other lamps...

Cooling Incubator with lighting Qualifications DQ (Design Qualification) Definition: Documented proof that the quality-related, GMP-related requirements has been adequately addressed in the design of equipment, including buildings, premises, and auxiliary equipment The user-requirement profiles (specifications) are documented and confirmed by us. On request, a specification can be created by us. IQ (Installation Qualification) Definition: Documented proof that critical equipment and systems have been delivered and installed in accordance with the set requirements and government regulations. The...