tritec Climatic Cabinet with light Outside dimensions: Inside dimensions: Temperature Range: Humidity Range: Housing Made of stainless steel (Backplane, as well as top and bottom side of the cabinet of galvanised sheet steel). Set of 4 wheels, 2 with brakes. Interior space Made of stainless steel. Cleaning friendly by rounded corners, slippery surface in the interior, meets highest hygiene requirements. Insulation high density foamed-in-place polyurethane, CFC-free Circulation air cooling for rapid and uniform temperature control, reducing temperature gradients to a minimum Door Solid door, supplied as standard with right hand hinge, also available with left hand hinge at no extra cost. Grease resistant magnetic seal. Additionally equipped with one inner glass door. Interior fittings - 4 pcs. Grating-type shelves (dim.: 530x570 mm) (max. 12 shelves possible) - 1 pc cable port Control system located above door. Actual value and setpoint digitally adjustable via membrane push-button. Actual value permanently readable Working range temperature and humidity Temperature: 10°C up to 45°C Humidity: ambient up to 85% Temperature accuracy: +/- 2°C Humidity accuracy: +/- 5% (Ill. similar) tritec ® Gesellschaft für Labortechnik und Umweltsimulation mbH Hüttenstraße 9 D-30165 Hannover Homepage www.tritec-klima.com E-mail [email protected] Phone ++49-511/3523508 Fax ++49-511/3521715 technische Änderungen vorbehalten

tritec Climatic Cabinet with light With the following control units: - 2 pieces Digital thermostat with microprocessor enables PID Auto-tuning controller for temperature and humidity. - Over-temperature safety thermostat, with alarm message - Under safety temperature limiter, with alarm message Alarm message: - Over and under temperature alarm - Compressor failure alarm - Humidity alarm (low water) Steam humidification Complete with 20 lt. tank for filling with distilled water. (No tap water) Water quality: Dest. water, pure water quality<20μS/cm, degree of purity: 5μmm. Illumination device Exhaustive...

tritec Climatic Cabinet with light Qualifications DQ (Design Qualification) Definition: Documented proof that the quality-related, GMP-related requirements has been adequately addressed in the design of equipment, including buildings, premises, and auxiliary equipment The user-requirement profiles (specifications) are documented and confirmed by us. On request, a specification can be created by us. IQ (Installation Qualification) Definition: Documented proof that critical equipment and systems have been delivered and installed in accordance with the set requirements and government regulations....