• The SRCOOL60KCW is not a standalone unit. It must connect to an existing building chilled water system to operate. In-Row Cooler for Server Racks - 60 kW, 208-230V, Chilled Water Type MODEL NUMBER: SRCOOL60KCW Modular, in-row cabinet design uses chilled water to efficiently cool your components, lower overall energy costs and lengthen the lifespan of your valuable equipment. Recommended for mid- to large-sized data centers with an existing chilled water system. Description The SRCOOL60KCW SmartRack® In-Row Precision Server Rack Cooling System pulls unconditioned air through the rear of the unit, cools it using chilled water and releases cold air through the front. The row-based unit integrates into your data center environment adjacent to heat loads. Its high cooling efficiency lowers overall energy costs and lengthens the lifespan of your equipment. Its modular, in-row cabinet design easily facilitates expansion or movement on its built-in casters, allowing your increasing cooling needs to be reconfigured as your data center grows. A built-in controller detects and manages data center temperatures, automatically adjusts cooling levels and supports two automatic control modes: intelligent control mode and PID control mode. The user-friendly LED and LCD interface provides at-a-glance setting, monitoring and access to system configuration and status. An alarm system notifies you in case of abnormal conditions, including high condensation, high or low temperature or humidity, and full drain pan. The SRCOOL60KCW In-Row Rack Air Conditioner also monitors heat load temperature via remote sensors and informs you of any water leakage. Hot-swappable multi-speed fans provide variable CFM based on room conditions. The doors and side panels lock securely to help prevent damage, tampering or theft. A preinstalled TLNETCARD web management accessory lets you monitor temperatures, receive alerts, review logs and control settings from anywhere 24/7 via Ethernet network. Highlights • Accurately detects and manages temperature and output • Provides 204,000 BTU (60 kW) of cooling capacity • Locks securely to prevent unauthorized access • User-friendly LCD indicators and control panel • Supports optional remote management via Ethernet Package Includes • SRCOOL60KCW SmartRack InRow Precision Server Rack Cooling Unit - 60 kW, 208-230V, 50/60 Hz, Chilled Water Type •(2) 4-pin terminal blocks •3-pin terminal block • RJ45 to DB9 cable • (2) Cable glands • (2) Communications wiring duct cover plates •Power supply cover plate •Hex wrench, 2.8 mm •(3) Cable ties •(2) Keys • Owner's manual

Features 204,000 BTU (60 kW) of Cooling Power • Pulls unconditioned air through rear of the unit, cools it with chilled water and releases cold air through front • Lowers energy costs • Lengthens equipment lifespan • Row-based unit integrates with data centers and can be positioned adjacent to heat loads Intelligent Temperature Control • Detects and manages data center temperature • Automatically adjusts cool air output • Dual auto control modes: intelligent control mode and PID control mode User-Friendly Interface • Easy-to-read LEDs indicate power, standby, alarm and fault information at a...

Advanced Network Monitoring • Built-in TLNETCARD lets you monitor temperatures, receive alerts, review logs and control settings 24/7 via Ethernet • Optional SRCOOL60KRT or SRCOOL60KRTH remote sensors (sold separately) accurately monitor heat loads

© 2020 Tripp Lite. All rights reserved. All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies: https://www.tripplite.com/products/product-certification-agencies