4x2 HDMI over Cat6 Matrix Switch Kit, Switch/2x Pigtail Receivers - 4K 60 Hz, HDR, 4:4:4, PoC, 230 ft. (70.1 m), TAA Supports 4K @ 60 Hz video resolutions (4:4:4) as specified in HDMI 2.0 Switches between 4 source devices by manual push button or included IR remote Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy Power over Cable (PoC) technology provides power to receivers via Cat6 cable Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases Switch/dual-receiver combo allows custom switching of four HDMI 4K video/audio signals to two HDMI 4K displays up to 230 ft. away. Source device(s) with HDMI output (Blu-ray player, cable box, media server) Display device(s) with HDMI input (HDTV, projector, monitor) HDMI Matrix Switch Kit Ideal for Digital Signage in Offices, Schools and Trade Shows This HDMI matrix switch kit includes a quad-input switch and two pigtail-style receivers. It’s recommended for office buildings, schools, houses of worship, trade shows, meeting facilities, retail settings, hotels and other locations with video presentations or digital signage applications. The matrix switch and receivers extend 4K audio/video up to 230 feet (70.1 meters), making the kit ideal for areas where the four source devices and dual displays are farther apart than conventional cabling allows. External power supply (Input: 100–240V, 50/60 Hz, 1.5A; Output: 24V 1A) (4) International plug adapters (Australia, Europe, U.S., U.K.) Mounting hardware Owner’s manual Extends a 4K A/V Transmission up to 230 ft….or Even Farther The B127A-4X2-BH2PH allows video from any of four connected HDMI sources to display on two HDMI displays up to 230 feet away via user-supplied Cat6 cabling. You may select which video to display on which monitors by using the push button on the switch or the included IR remote control, which lets you operate the switch from the receiver end of the installation. By installing Tripp Lite B127A-010-H signal repeaters (sold separately) between the switch and receivers, you can extend the signal up to 400 feet (121.9 meters) total per video output. Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color The B127A-4X2-BH2PH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with 36-bit Deep Color. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This switch kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks After you connect the included external power supply to the switch, Power over Cable (PoC) technology powers the receivers over Cat6 cable. LEDs on both the switch and receivers will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receivers without the need for a nearby AC outlet. Multi-Resolution Support Allows Mixing and Matching of Displays of Different Resolutions Say you have a brand new 4K/60 Hz HDTV in the living room, but want to extend video from the source devices to the older 1080p TV in the kitchen or the 4K (at 30 Hz) monitor in your home office. The B12

4X2-BH2PH is backward compatible with 4K/30 Hz and 1080p resolutions via automatic switching, allowing each connected monitor to display video at its maximum resolution. Plug-and-Play Operation for Quick Setup and Immediate Use The included matrix switch and receivers operate with no software required. The switch comes with detachable surface-mount brackets for mounting to a pole, rack or flat surface. Connect the switch to as many as four sources with user-supplied HDMI cables (such as Tripp Lite’s P568- or P569-Series). Then, connect the pigtail receivers’ built-in HDMI plugs to the displays....

Receiver/Transceiver Video Output Receiver - Number of Video Outputs Range Extension with Booster Range Extension using other Tripp Lite product Extended Mode Mirror Mode Other Tripp Lite product used to extend range Max Supported Color Depth Signal Transmission AUDIO Audio Ports Audio Ports Details (x2) Outputs support lossless audio formats such as LPCM 7.1 Audio Input Audio Output Audio Specification Supports lossless audio formats such as LPCM 7.1 INPUT Voltage Compatibility (VAC) Power Source POWER Power Source Type AS/NZS 3112; BS1363; CEE 7/16 Schuko; NEMA 1-15P Power Source Transmitter...

External Power Supply Output Specs (V / A) External Power Supply Cord Length (ft.) External Power Supply Cord Length (m.) External Power Supply Plug(s) AS/NZS 3112 Australia; BS 1363 UK; CEE 7/16 Schuko; NEMA 1-15P North America USER INTERFACE, ALERTS & CONTROLS LED Indicators TRANSMITTER: OUTPUT 1-2 (x2 Orange, lights up when the Output 1 and Output 2 buttons are pressed); A, B, C, D (x8 Green, lights up when one of the four desired sources has been selected for the two receiver outputs); Power (x1 Green, lights up when the switch is connected to power); Power/Signal Indicator 1-2 (x2 Green,...

Transmission Distance EDID Compatible IR Remote Extension Support Consumer Electronics Control (CEC) Supported Zero Latency CONNECTIONS Number of Ports FEATURES & SPECIFICATIONS Port Selection Pushbutton; Remote Selector HDCP Specification Driver Required Recommended Category Cable Integrated/Removable Cable Mounting Accessory Included Multi-Resolution Support STANDARDS & COMPLIANCE External Power Supply Certifications Certification & Compliance CE (Europe); FCC (USA); RoHS; REACH WARRANTY Product Warranty Period (Worldwide) © 2022 Tripp Lite. All rights reserved. All product and company names...