MultiCentric® Cementing Station Multiplies the Efficiency of the Lens Alignment and Cementing Processes

Product catalog summary

Overview
The MultiCentric® Cementing Station is an advanced system designed to enhance the efficiency of lens alignment and cementing processes. It builds upon the established OptiCentric® systems, offering significant improvements in cycle time and precision.

Key Features

Cycle time of less than 10 seconds for active alignment of doublets.
High-precision measurement of centration errors in reflection mode with accuracy better than 0.1 µm.
Alignment accuracy with SmartAlign technology better than 2 µm.
Automatic alignment of the center of curvature of the upper lens surface to a customer-defined axis using SmartAlign technology.
Automated process controlled by software, including measurement, alignment, and UV curing.
Adaptable to different lens sizes and based on the proven OptiCentric® measurement system.

Applications

Ideal for high-volume production of doublets.
High-precision measurement and automatic active alignment of two lenses.
Lenses are aligned to the optical axis and can be fixed using the bell clamping method.
Homogeneous UV curing with constant rotation during illumination.

Software Features

Fully automated process of measurement, alignment, and UV curing.
Live imaging of centers of curvature and centration error measurement with tolerance input.
SmartAlign software module for intelligent lens alignment.
Real-time indication of centration error and saving of focal plane positions.
Manual and automated stage control, including focus, air bearing, piezo, and UV illumination.

Technical Data

Coaxial alignment accuracy of all optical surfaces is less than 2 µm.
Process time is less than 10 seconds, excluding UV curing.
Supports lens diameters from 4 to 100 mm, with other diameters available on request.

Contact Information
TRIOPTICS GmbH, Hafenstrasse 35-39, 22880 Wedel, Germany. Phone: +49-4103-18006-0, Fax: +49-4103-18006-20, Email: [email protected], Website: www.trioptics.com

Catalog excerpts

MultiCentric® Cementing Station Multiplies the Efficiency of the Lens Alignment and Cementing Processes-1

Cementing Station Cementing Processes

Open the catalog to page 1

MultiCentric® Cementing Station Multiplies the Efficiency of the Lens Alignment and Cementing Processes-2

MultiCentric® Cementing Station With the new MultiCentric® Cementing Station lens pairs are quickly and accurately aligned and cemented. The cementing station is a further development of the well-established OptiCentric® systems. • Short cycle time of less than 10 seconds* for the active alignment of doublets • High-precision measurement of centration errors in reflection mode accurate to <0.1 µm • Alignment accuracy with SmartAlign technology better than 2 µm • Automatic alignment of the center of curvature of the upper lens surface to a customer-defined axis using SmartAlign technology (coaxial...

Open the catalog to page 2

MultiCentric® Cementing Station Multiplies the Efficiency of the Lens Alignment and Cementing Processes-3

Camera 1 j Camera 2 Camera 3 All Sample Info Product Home: Focus Stage Description j Lens Design Results Without UV curing, dependent on work piece Other diameters on request

Open the catalog to page 3

MultiCentric® Cementing Station Multiplies the Efficiency of the Lens Alignment and Cementing Processes-4

Headquarters Wedel Armstrong© Berlin Headquarters Wedel _ ProLog Optics, Israel < SamJoong Optical, Korea TRIOPTICS GmbH ■ Optische Instrumente Hafenstrasse 35-39 ■ 22880 Wedel / Germany E-mail: [email protected] ■ http://www.trioptics.com © 2015 TRIOPTICS GmbH ■ All rights

Open the catalog to page 4

All TRIOPTICS catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list