MC664 / MC664-X Backlit Status Display and LEDs Quad Core 128 Axis Coordinator Panel Mount or DIN Rail Mount Easy Release Expansion Cover RS232 / RS485 Modbusrtu, hostlink or user programmable Common Earthing For Improved Noise Rejection Ethernet Programming Modbus-TCP, Ethernet-IP, Trio Activex, UNIPLAY HMI, UDP core flexible axis I/O, CAN, Power, Analogue, WDOG First Expansion Module FEATURES  to 128 Axes - 64 Stepper / Up Servo Axes and 64 Virtual Axes  Precise 64 Bit Motion Calculations with Quad Core Cortex A9 1GHz Processor (P862)  Dedicated Communications Core  Built-in EtherCAT Port  EtherCAT, Sercos, SLM and RTEX Digital Drive Interfaces  Linear, Circular, Helical and Spherical Interpolation  Flexible CAM shapes, Linked Motion  EnDAT and SSI Absolute Encoder Supported  Hardware Linked Outputs for Camera / Laser Control  Ethernet-IP / Modbus TCP / Ethernet Interface Built-In  Anybus-CC Module for Flexible Factory Comms Including ProfiNet/Profibus  61131-3 Programming Option IEC  Multi-tasking BASIC Programming  File Handling Text  Robotic Transformations  Memory Card Slot SD  CANopen I/O Expansion  Backlit LCD Display  RoHS and

The MC664 / MC664-X is Trio’s highest performance and most flexible Motion Coordinator and is based on the Quad Core Cortex A9 1GHz ARM processor. The MC664 and MC664X feature a total of 128 axes in software with up to 64 motor axes and 64 bit integer position registers. 64 bit floating point calculations are used for ultra precise axis resolution. Using expansion modules the MC664 supports up to 64 networked digital drives, 24 analogue servo drives, 25 pulse and direction drives and 25 absolute and incremental encoders. Every axis can be programmed to move using linear, circular or helical or...

MC664 / MC664X Expansion Configure your application by connecting up to 7 half-height expansion modules or 3 full-height expansion modules. Each module easily attaches to the controller with a high density bus connection and a uniquely designed screw integrates the earth planes of all modules and Motion Coordinator together. Trio's feature enable code system for axis activation allows the whole system to be scaled exactly to your requirements. The P876, P872 and P871 all come equipped with two axes per module as standard. To add further axes, the P914 Feature Enable Code can be purchased. Each...

MC664 / MC664X Expansion For use with Stepper, Analogue Servo and Piezo Motors with support available for SSI/Endat/Tamagawa Absolute encoders. Standard FlexAxis interface modules are available in 4 axis (P879) and 8 axis (P874) versions. An 8 axis SSI absolute encoder version (P881) is available as a special order. Max Interfaces per MC664 Max Axes on MC664 Connectors: Encoder Discrete Wiring Bus to MC664 Registration Inputs* Position based registration Bi-direction registration input/position switch output Optically isolated registration inputs Map any registration input to any Axis Independant...