Flexslice System
4Pages

Flexslice System Flexible EtherCAT Devices quick release EBUS connecting System status leds Flexslice Coupler Flexslice expansion modules Power 24V Quick Connect push-in Terminals UK | USA | CHINA | INDIA | WWW.TRIOMOTION.COM  Use with Trio or 3rd Party EtherCAT Masters  High performance, flexible topology and simple configuration.  Bus cycle time synchronised with Motion Coordinator Servo Period.  Bus coupler module with 2 x RJ45 Ethernet ports for EtherCAT connection.  EtherCAT protocol remains fully intact down to individual modules using the E-bus system.  I/O functions tightly synchronised to motion using EtherCAT distributed clocks.  Automatic mapping to the Motion Coordinator I/O system.  DIN rail mounted.  Multiple practical push-in connector options – No break outs required  Clip-together design with ‘quick release’ locks for mechanical integrity.  User labelling facility  Machine builder c

The EtherCAT Flexslice System is designed to let you do more! It offers fast flexible expansion for motion applications and can be used with Trio or 3rd Party Masters. Trio's Flexslice input/output modules provide a robust, high speed and flexible solution for both motion control and general automation. EtherCAT cycle times down to 250/usecs are supported and the bus coupler uses EBUS technology to bring all the sub-modules on to the EtherCAT network with no degradation in performance. The Flexslice system makes available a selection of digital and analogue I/O terminals as well as motion...

Flexslice System P366: ETHERCAT COUPLER The P366 Flexslice EtherCAT Coupler connects EtherCAT with the EtherCAT slices. One station consists of a P366 Coupler and up to 16 Flexslice EtherCAT modules. The Coupler converts the passing telegrams from Ethernet 100BASE-T to EBUS signal format. Power supply 24V DC, 0.8A min for requirement full system EtherCAT RJ45 Connection Protocol Data rate For Trio or 3rd Party EtherCAT Masters P372: 16-IN PNP The P371 digital output Flexslice connects the binary control signals from the Motion Coordinator to the machine’s output devices at 24V DC. All 16...

The P376 digital output Flexslice connects the binary control signals from the Motion Coordinator to the machine’s output devices, such as relays, contactors, valves, lamps etc. at 24V dc. All 16 outputs are current sinking (NPN) type and have electrical isolation. Outputs and power connection are via 2 x single-row push-in connectors. The Flexslice module indicates the output signal states via LEDs. 110mA max 16(2 banks of 8) 24V (+/-20%) DC Resistive, inductive and capacitive "ON" time 75us (90% to 10%) "OFF" time (typ) Max. Output current Module current consumption (EBUS5V) Number...