EURO205X
2Pages

Accessories: P406 Euro205x Additional Servo Axis P412 Euro205x Additional Encoder Input P416 Euro205x Additional Stepper Axis P350 RS232 Serial Cable P435 Serial to Fibre-Optic Adaptor P445 Euro205x Daughter Board Mounting Kit P317, P318, P319, P326, P327 CAN Modules Pxxx All Daughter Boards RACK MOUNT PRODUCT CODE: P151 EURO205X 18 The Euro205x Motion Coordinator is a Eurocard stepper/ servo controller with the built-in ability to control up to 4 servo or stepper motors in any combination. In addition a single Trio Daughter Board may be tted to allow the control of additional axes or a communications channel. The Euro205x is designed to provide a powerful yet costeffective control solution for OEM machine builders who are prepared to mount the unit and provide the power supplies required. User programs are written in Trio’s established multi-tasking TrioBASIC language using the powerful Motion Perfect 2 application development software making complex motion such as cams, gears, linked axes, and interpolation easy. MULTI-TASKING • 7 simultaneous TrioBASIC tasks The Euro205x features a total of 8 axes in software. Any axes not assigned to built-in hardware can be used as a virtual axis. Standard axis or multi-axis digital drive daughter boards may also be added. AXIS CONFIGURATION (WITHOUT SERCOS / CAN OR SLM) SERCOS CAN SLM Up to 8 axes* (2 Standard) Up to 4 axes* (2 Standard) Up to 3 axes (3 Standard) P291 P293 P292 *Extra axes added by P701, P702 and P704 The built-in inputs and outputs may be used for system interaction or may be dened to be used by the controller for end of travel limits, datuming and feedhold functions as required. 8 status LEDs are available which can be set to display the status of banks of inputs or outputs. If the built-in CAN channel is not used for connecting I/O modules, it may optionally be used for CAN communications or as a DeviceNet Slave. I/O CAPABILITY • 16 24V dc inputs and 8 24V dc output channels • 2 x 12 Bit analogue inputs • Expandable to 256 I/O channels and 32/16 analogue I/O channels using the P317, P318, P319, P326 and P327 modules Axis 0 stepper / servo / encoder Axis 1 stepper / servo / encoder Axis 2 stepper / servo / encoder Axis 3 stepper / servo / encoder Axis 4 Added by use of an axis option board tted to intelligent option slot FEATURE ENABLE CODES Axis 5,6,7 virtual The Euro205x is supplied as standard with axis 0 congured as a stepper axis. Software “Feature Enable Codes” (FEC) can be purchased and then entered using Motion Perfect to enable axes 1,2 and 3 for either servo or stepper operation. Axis 0 can also be upgraded to a servo axis. No extra hardware is required to update these additional axes. *Extra Axes can be added by P406, P412 and P416

RS232 PROGRAMMING PORT DAUGHTER BOARD CONNECTOR 96 WAY CONNECTOR FOR AXIS AND I/O CONNECTIONS TTL PORT FOR FIBRE OPTIC ADAPTOR RS232 PORT, MODBUS, USER PROGRAMMABLE OR HOST LINK RS485 PORT, MODBUS, USER PROGRAMMABLE OR HOSTLINK 19 CAN PORT TRIOCAN I/O, DEVICENET SLAVE, CAN OPEN OR USER PROGRAMMABLE STATUS LEDS 2 ANALOGUE INPUTS OVERALL DIMENSIONS (SHOWN WITH DAUGHTER BOARD MOUNTING KIT AND STANDARD CARD) Daughter Board Mounting Kit 50mm EURO205X CONFIGURED WITH P445 DAUGHTER BOARD MOUNTING KIT The Euro205x has two RS232 ports and one RS485 built in, and one further serial channel available...