Catalogs >
Trimod'Besta >
LTDS03 - A 01 090

LTDS03 - A 01 090
3Pages

Catalog excerpts

Type: A 01 090 to A 01 095 Data Sheet LTDS03EN | Page 1 of 3 For manually adjustable operating differentials. Ideal for 2-point control, e.g. pump control. Type A 01 090 (SIL 1) Operating differential 37 to 218 mm Nominal pressurePN 25 acc. to EN/DIN Operating temperature 0 to 300°C Operating differential 12 mm, fixed Wetside materialstainless steel (CrNiMo) Housing materialseawater resistant die cast aluminium Flange_square 92 x 92 mm, PCD 92 mm Switch elementMicroswitch SPDT with silver contacts Switch rating250 VAC, 5 A / 30 VDC, 5 A EnclosureIP65 Overall length246 to 561 mm, depending on type Weightapprox. 2,0 kg ApprovalsABS, BV, DNV, GL, LRS, RINA, RMRS Flange dimensions Adjustment of switching differential The switching differential can be set by inserting pegs in holes 1 to 9 of the adjustment block (see sketch). The resulting differentials, the position of the switching points and the overall swept arc of the float can be seen in the table below. The values are in mm and are referenced to water at 20°C and density of 1.0 kg/dmF. Data Sheet LTDS03EN English, October 2015 | With reservation of technical modification.

Open the catalog to page 1

Data Sheet LTDS03EN | Page 2 of 3 not for use with the test actuator Type Flange Flange Stud Stud length material material length 2829.1 V = 38 mm P250GH 58 30 mm important: Not for use in applications on top of the tank. for use with the test actuator (type 2382 & 2383) Type Flange Flange Stud Stud length material material length 2829.2 V = 38 mm P250GH 58 70 mm important: Not for use in applications on top of the tank. Test actuator The test actuators 2382 and 2383 can be used, if the tank is already equipped with a counterflange, type 2829.2,...

Open the catalog to page 2

Data Sheet LTDS03EN | Page 3 of 3 Options ■ Dual SPDT microswitches (SIL 2) ■ Microswitches with gold plated contacts ■ Self checking proximity switches acc. to NAMUR ■ Enclosure IP67 or IP68 for submersible applications ■ 5A/380 VAC 0,3A/440 VDC (type: AE26) ■ Flameproof switches ■ Pneumatic switches ON/OFF with 3/2 way valve ■ High and low temperature versions ■ Cable entry with 3/4" NPT internal thread ■ Switch housing: - chromated - stainless steel (316 equiv.) - epoxy painted ■ Flange modules: - acc. to ANSI, EN/DIN, BS10 and JIS Quality Assurance ■ Bachofen AG is certified acc....

Open the catalog to page 3

LTDS03 - A 01 090 3Pages

Catalog excerpts

All Trimod'Besta catalogs and technical brochures

LTDS03 - A 01 090
3Pages