Catalogs >
TriMark >
050-1900 8mm Single Rotary Latch

050-1900 8mm Single Rotary Latch
4Pages

Catalog excerpts

050-1900 8mm Single Rotary Latch ATri Mark® TriMark’s newest innovation in rotary latches features a robust modular design that offers extensive actuation locations and options providing application flexibility in a compact design. Designed for medium to heavy-duty applications for on or off-highway applications, this single rotor latch is available to meet FMVSS 206 (ECE R11). DESIGNED FOR: • Personnel, compartment door and door hold-open applications for on and off-highway vehicles • Interior door thickness of45-57mm (1.77-2.25”). Depending on the actuator type and location the overall height could be greater. Please contact TriMark for specific details. • Medium to heavy duty doors of 23-81 kg (50-175 lbs.) with maximum door seal pressure of 36 kg (80 lbs.) TriMark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States Tel: 641-394-3188 Fax: 641-394-2392 1-800-447-0343 www.trimarkcorp.com TriMark Europe Cedar Court Walker Road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com

Open the catalog to page 1

FEATURES/BENEFITS: • Modular case construction is preconfigured with multiple actuation points on the front case allowing top/bottom actuation including stacked actuator levers providing the most configurable rotary door latch ever offered • Compact size and shape allows maximum use of door space and minimizes visibility issues without compromising strength and robustness • Rotor provides for vertical clearance of strike allowing for door sag, misalignment and ease of installation • Two position rotor version for personnel door for FMVSS 206 (ECE R11) applications • 8mm diameter automotive...

Open the catalog to page 2

MATERIAL: • Case halves: high strength steel • Rotor and catch: heat treated steel • Springs: non-corrosive stainless steel FINISH: • Zinc plated, clear chromate steel components INSTALLATION: • Easy to install, mounts with (2) M8 x 1.25 class 8.8 or better fasteners are required for FMVSS 206 (ECE R11) applications (not included) • Tighten to manufacturers’ recommended torque value, however, do not exceed 22.2 N-m (200 in-lbs) USE WITH: Patent(s) Pending Applications of this latch may fall within the requirements of FMVSS 206 and SAE J839 safety standards. These safety related requirements...

Open the catalog to page 3

Modular construction with multiple actuation points allows top/bottom actuation including stacked actuators as well as combinations of actuation points.

Open the catalog to page 4