Catalogs >
TriMark >
050-0850

050-0850
2Pages

Catalog excerpts

TriGuard Heavy Latch Module With This heavy duty latch module is designed for medium to heavy-duty entrance and rear door applications. It features a proven single rotor latch design and high strength 8 gauge (4.2mm) front mounting plate with flange mounting. • Medium to heavy duty doors greater than 200 lbs. (91kg) with door seal pressures of 50-150 lbs. • Heavy duty modular construction — survives in punishing environments • Can be used on retrofit or new surface mount vehicle construction • Heavy duty latch/striker with self-aligning "slam cam" provides rotor/cam assist to heavy doors, hinges and compensates for door sag TriMark Corporation United States TriMark Corporation TriMark Europe Cedar Court Walker Road Bardon Hill United Kingdom

Open the catalog to page 1

050-0850 TriGuard Heavy Duty Latch Module With Slam Cam Option AVAILABLE: Right or left hand configurations (right hand shown) Striker with self-aligning “slam cam” Replaceable striker alignment lift blocks Custom configured release levers INSTALLATION: Four M8 X 1.25 class 8.8 or better fasteners are recommended (not included) Tighten to the manufacturers' recommended torque value MATERIAL: Case halves: high strength steel Springs: non-corrosive stainless steel Latch complies with FMVSS206 when tested with approved TriMark Striker Bolts in accordance with SAE J839 FINISH: Zinc plated,...

Open the catalog to page 2