050-0250

050-0250

050-0250

Product catalog summary
Overview: The Single Rotor Latch & Linkage system is designed for use in occupant or exit/entry doors of recreational vehicles, specialty vehicles, and light-duty off-highway vehicles. It complies with FMVSS 206 standards and offers flexibility for internal or external door mounting with remote activating handles.
Specifications:
  • Supports door weights up to 75 lbs (34 kg).
  • Recommended door seal pressures are 20-25 lbs (9-11 kg), not exceeding 50 lbs (23 kg).
  • Compatible with TriMark 070-0100 Striker Bolt.
Design Features:
  • Available in right or left-hand configurations.
  • Optional spacer plates may be required based on door frame thickness.
  • Improved versions offer increased mechanical advantage, reducing release efforts.
Installation:
  • Mountable inside or outside the door edge.
  • Requires three 1/4-20 UNC grade 5-type or better fasteners.
  • Fasteners should be tightened to the manufacturer's recommended torque, not exceeding 120 in-lbs (13.3 N-m).
Materials and Finish:
  • Components are zinc plated with clear chromate finish.
  • Internal latch components are made of heat-treated stamped steel.
  • Springs are made of non-corrosive stainless steel.
  • Case halves are constructed from high-strength steel.
Internal Lubrication: An oven-cured dry lubricant is applied to all critical moving parts.
Compliance and Standards:
  • Complies with FMVSS 206 when used with approved TriMark Striker Bolts.
  • Meets FMVSS 206 load requirements and may be used in FMVSS 206 applications pending TriMark approval.
  • Applications may fall within FMVSS 206 and SAE J839 safety standards.
Additional Information: For complete dimensions, specifications, and installation procedures, refer to individual part drawings. Engineering assistance and application drawings are available.
See more

Catalog excerpts

050-0250-1

050-0250 Single Rotor Latch & Linkage This latch and linkage system is intended for occupant or exit/entry doors for recreational vehicles including motor homes and travel trailers and specialty vehicles including ambulance, fire/rescue and off-highway vehicles (light duty) that require compliance to FMVSS 206 standards. The flexible design allows for internal or external door mounting and provides automotive logic function with remote activating handles. DESIGNED FOR:  Door weights up to 75 lbs (34 kg)  Door seal pressures of 20-25 lbs (9-11 kg) recommended for best results (not to exceed 50 lbs [23 kg])  Use with TriMark 070-0100 Striker Bolt TriMark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States Tel: 641-394-3188 Fax: 641-394-2392 1-800-447-0343 www.trimarkcorp.com TriMark Europe Cedar Court Walker Road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com

 Open the catalog to page 1
050-0250-2

ATri Mark® 050-0250 Single Rotor Latch & Linkage FINISH: For more information visit www.trimarkcorp.com • Improved versions are available with increased mechanical advantage that reduce the release efforts at the exterior and interior handles. These versions retrofit with previous part numbers but may require connecting rod revisions, due to the increased length of the linkage and slightly revised rod connection points. • Right or left hand configurations (left hand shown) • Optional spacer plates may be required and is dependent upon the door frame thickness and the particular assembly used....

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.