Catalogs >
TriMark >
050-0170 Two Rotor Latch With Bellcrank Linkage

050-0170 Two Rotor Latch With Bellcrank Linkage
2Pages

Catalog excerpts

050-0170 Two Rotor Latch With Bellcrank Linkage - 1

050-0170 Two Rotor Latch With Bellcrank Linkage ♦VTri/War/r This two rotor latch is designed for medium to heavy-duty applications for off highway entrance doors where push button handle actuation is desired. It features an integrated linkage that allows for direct push button actuation and direct inside release and provides for ease of mounting and applications. DESIGNED FOR: • Door thicknesses of 1-7/8" (47.6mm) or greater • Door weights of 50-200 lbs. (23-91 kg) • Door seal pressures of 50-150 lbs. (23-68 kg) (suggested for best results) • Use with TriMark 070-0200 Striker Bolt Tri Mark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States TriMark Europe Cedar Court Walker Road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com 10/18-9

Open the catalog to page 1

050-0170 Two Rotor Latch With Bellcrank Linkage - 2

Two Rotor Latch With Bellcrank Linkage • In left or right hand configurations (left hand shown) • With (4) 1/4-20 UNC or M6 X 1 threaded axles • With inside release lever options and trip lever options MATERIAL: • Internal latch components: heat treated, smooth edge stamped steel • Case halves: high strength steel • Springs: non-corrosive stainless steel FINISH: • Zinc plated, clear chromate steel components • (4) 1/4-20 UNC grade 5 or M6 X 1 class 8.8 mounting fasteners (not included). • Tighten to the fastener manufacturers’ recommended torque value, however, do not exceed 120 in-lbs...

Open the catalog to page 2

050-0170 Two Rotor Latch With Bellcrank Linkage 2Pages

Catalog excerpts

All TriMark catalogs and technical brochures

050-0170 Two Rotor Latch With Bellcrank Linkage
2Pages