050-0150 Two Rotor Latch & Release Linkage ATri Mark® This two rotor latch is designed for medium to heavy-duty applications for off-highway entrance doors. It features an integrated linkage that allows for direct L-handle actuation and provides for ease of mounting and applications. DESIGNED FOR: • Door thicknesses of 1-7/8" or greater (47.6mm) • Door weights of 50-200 lbs. (23-91 kg) • Door seal pressures of 50-150 lbs. (23-68 kg) (suggested for best results) • Use with TriMark 070-0200 Striker Bolt Tri Mark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States TriMark Europe Cedar Court Walker road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com 10/18-12

050-0150 Two Rotor Latch & Release Linkage AVAILABLE: • In left or right hand configurations (right hand shown) • With drive bar receiver parallel to striker bolt or rotated in 15° increments (as illustrated) INSTALLATION: • (4) 1/4-20 UNC grade 5 mounting fasteners (not included). • Tighten to the fastener manufacturers’ recommended torque value, however, do not exceed 120 in-lbs (13 N-m) • Maximum .312” (7.9mm) diameter mounting holes LATCH & STRIKER INSTALLATION: • Install striker bolt in door frame • Close door carefully and check for interference between head of striker bolt and latch components...

Optional Designs Door Conventions