050-0117 Two Rotor Latch With Coaxial Trip ♦VTri/War/r This two rotor latch is designed for medium to heavy-duty applications for on or off-highway compartments and access panels. It features a coaxial trip mechanism for applications where it is desirable to provide additional support to the trip lever with a single position latch. DESIGNED FOR: • Door thicknesses of 1-7/8” or greater (47.6mm) • Door weights of 50-200 lbs. (23-91 kg) • Door seal pressures of 50-0150 lbs. (23-68 kg) (suggested for best results) • Applications where it is desirable to provide additional support to the trip lever • Use with TriMark 070-0200 Striker Bolt AVAILABLE: • In left or right hand configurations (right hand shown) • With (4) 1/4-20 UNC or M6 X 1 threaded axles or .286” (7.3mm) diameter “thru” axles • With trip lever options (please inquire) • With a torsion return spring TriMark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States TriMark Europe Cedar Court Walker Road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com 10/18-

050-0117 Two Rotor Latch With Coaxial Trip FINISH: • Zinc plated, clear chromate steel components MATERIAL: • Internal latch components: heat treated, smooth edge stamped steel • Case halves: high strength steel • Springs: non-corrosive stainless steel INSTALLATION: • (4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 or better fasteners are required (not included) • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m) • Fastener mounting holes diameter should not exceed .281” (7.1mm) INTERNAL LUBRICATION: • Oven-cured dry lubricant is applied...