050-0113 Two-Rotor Latch Single Position Intertrip ATri Mark® This two rotor latch is a sub-platform to the TriMark proven 050-0100 series latch and is designed for medium to heavy-duty applications for on or off-higway entrance doors, compartments and access panels. It features an internal trip mechanism for applications where it is desirable to have the release mechanism inline with the latch and a single position latch. DESIGNED FOR: • Door thicknesses of 1-7/8” or greater (47.6mm) • Door weights of 50-200 lbs. (23-91 kg) • Door seal pressure of 50-150 lbs. (23-68 kg) (suggested for best results) • Use with TriMark 070-0200 Striker Bolt TriMark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States Tel: 641-394-3188 Fax: 641-394-2392 1 -800-447-0343 www.trimarkcorp.com TriMark Europe Cedar Court Walker Road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com TriMark (Xuzhou) Building A5 Jinwu Road Xuzhou Economic Development Zone Xuzhou, Jiangsu 221004 PR China Tel: +86 516 8773 0018 Fax: +86 516 8773 0058 www.trimarkcn.com

AVAILABLE: • In left or right hand configurations • With (4) 1/4-20 UNC, M6 x 1 threaded axles or .286” (7.3mm) diameter “thru” axles • With trip lever options FINISH: • Zinc plated, clear chromate steel components MATERIAL: • Internal latch components: heat treated, smooth edge stamped steel • Case halves: high strength steel • Springs: non-corrosive stainless steel INSTALLATION: • (4) 1/4-20 UNC grade 5, M6 x 1 class 8.8 or better fasteners are required (not included) • Tighten to the fastener manufacturers’ recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m) • Fastener...