Catalogs >
TriMark >
050-0110 Two Rotor Single-Position Latch

050-0110 Two Rotor Single-Position Latch
2Pages

Catalog excerpts

050-0110 Two Rotor Single-Position Latch - 1

050-0110 Two Rotor Single Position Latch This two rotor latch is a sub-platform to the TriMark proven 050-0100 series latch and is designed for medium to heavy-duty applications for on or off highway compartments and access panels. DESIGNED FOR: • Applications where it is desirable to have a single position rotary latch • Door thicknesses of 1-7/8” or greater (47.6mm) • Door weights of 50-200 lbs. (23-91 kg) • Door seal pressures of 50-150 lbs. (23-68 kg) (suggested for best results) • Use with 5/8 or .625” Striker Bolt (customer provides) Tri Mark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States TriMark Europe Cedar Court Walker Road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com 12/19-3

Open the catalog to page 1

050-0110 Two Rotor Single-Position Latch - 2

AVAILABLE: • In left or right hand configurations (right hand shown) • With (4) 1/4-20 UNC, M6 X 1 threaded axles or .286” (7.3mm) diameter "thru" axles • With trip lever options (please inquire) • Straddle mount option FINISH/MATERIAL: • Zinc plated, clear chromate steel components • Internal latch components: heat treated, smooth edge stamped steel • Case halves: high strength steel • Springs: non-corrosive stainless steel INSTALLATION: • (4) 1/4-20 UNC grade 5 or M6 X 1 class 8.8 or better fasteners are required (not included). • Tighten to the fastener manufacturers' recommended torque...

Open the catalog to page 2