ATri Mark® This versatile two rotor latch is designed for medium to heavy-duty applications for on or off highway entrance doors, compartments and access panels. It features a variety of trip levers and mounting axles for ease of mounting and applications and is FMVSS 206 (ECE R11) compliant. DESIGNED FOR: • Door thicknesses of 1-7/8" (47.6mm) or greater • Door weights of 50-200 lbs. (23-91 kg) • Door seal pressures of 50-150 lbs. (23-68 kg) (suggested for best results) • Use with TriMark 070-0200 Striker Bolt TriMark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States Tel: 641-394-3188 Fax: 641-394-2392 1 -800-447-0343 www.trimarkcorp.com TriMark Europe Cedar Court Walker Road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com

AVAILABLE: INSTALLATION • In left or right hand configurations (right hand shown) • With (4) 1/4-20 UNC or M6 X 1 threaded axles • With trip lever options • Straddle mount option MATERIAL: • Internal latch components: heat treated, smooth edge stamped steel • Case halves: high strength steel • Springs: non-corrosive stainless steel • (4) 1/4-20 UNC grade 5 or M6 X 1 class 8.8 or better fasteners are required (not included) • Tighten to the fastener manufacturers’ recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m) • Fastener mounting holes diameter should not exceed .281”...

THE TRIP LEVERS ABOVE REPRESENT SIX TYPICALLY SUPPLIED OPTIONS. MANY MORE TRIP LEVER GEOMETRIES ARE AVAILABLE -- PLEASE INQUIRE.