*mydirectindustry

Catalogs
TriMark
050-0100 Two Rotor Latch

050-0100 Two Rotor Latch

Product catalog summary

Product Overview: The Two Rotor Latch by TriMark Corporation is designed for medium to heavy-duty applications, suitable for on or off highway entrance doors, compartments, and access panels. It is compliant with FMVSS 206 (ECE R11) standards.

Specifications:

Compatible with door thicknesses of 1-7/8" (47.6mm) or greater.
Supports door weights of 50-200 lbs. (23-91 kg).
Handles door seal pressures of 50-150 lbs. (23-68 kg).
Recommended for use with TriMark 070-0200 Striker Bolt.

Installation Requirements:

Requires (4) 1/4-20 UNC grade 5 or M6 X 1 class 8.8 fasteners (not included).
Fasteners should be tightened to the manufacturer's recommended torque, not exceeding 120 in-lbs (13.3 N-m).
Fastener mounting holes should not exceed a diameter of .281” (7.1mm).

Internal Lubrication: The latch is factory-lubricated with an oven-cured dry lubricant on all critical moving parts.

Compliance and Safety: The latch meets FMVSS 206 (ECE R11) and SAE J839 safety standards when used with approved TriMark Striker Bolts. The entire door hardware system must comply with these standards.

Available Configurations:

Left or right-hand configurations.
Options for (4) 1/4-20 UNC or M6 X 1 threaded axles.
Various trip lever options and a straddle mount option.

Materials and Finish:

Internal components: Heat-treated, smooth edge stamped steel.
Case halves: High strength steel.
Springs: Non-corrosive stainless steel.
Finish: Zinc plated, clear chromate steel components.

Catalog excerpts

ATri Mark® This versatile two rotor latch is designed for medium to heavy-duty applications for on or off highway entrance doors, compartments and access panels. It features a variety of trip levers and mounting axles for ease of mounting and applications and is FMVSS 206 (ECE R11) compliant. DESIGNED FOR: • Door thicknesses of 1-7/8" (47.6mm) or greater • Door weights of 50-200 lbs. (23-91 kg) • Door seal pressures of 50-150 lbs. (23-68 kg) (suggested for best results) • Use with TriMark 070-0200 Striker Bolt TriMark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States Tel: 641-394-3188 Fax: 641-394-2392 1 -800-447-0343 www.trimarkcorp.com TriMark Europe Cedar Court Walker Road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com

Open the catalog to page 1

AVAILABLE: INSTALLATION • In left or right hand configurations (right hand shown) • With (4) 1/4-20 UNC or M6 X 1 threaded axles • With trip lever options • Straddle mount option MATERIAL: • Internal latch components: heat treated, smooth edge stamped steel • Case halves: high strength steel • Springs: non-corrosive stainless steel • (4) 1/4-20 UNC grade 5 or M6 X 1 class 8.8 or better fasteners are required (not included) • Tighten to the fastener manufacturers’ recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m) • Fastener mounting holes diameter should not exceed .281” (7.1mm)...

Open the catalog to page 2

THE TRIP LEVERS ABOVE REPRESENT SIX TYPICALLY SUPPLIED OPTIONS. MANY MORE TRIP LEVER GEOMETRIES ARE AVAILABLE -- PLEASE INQUIRE.

Open the catalog to page 3

All TriMark catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list