Catalogs >
TriMark >
020-0750

020-0750
1 / 2Pages

Catalog excerpts

050-0850 TriGuard Heavy Latch Module With Slam Cam Option ATri Mark® TriMark Corporation 500 Bailey Avenue P.O. Box 350 New Hampton, Iowa 50659 United States Tel: 641-394-3188 Fax: 641-394-2392 1 -800-447-0343 www.trimarkcorp.com This heavy duty latch module is designed for medium to heavy-duty entrance and rear door applications. It features a proven single rotor latch design and high strength 8 gauge (4.2mm) front mounting plate with flange mounting. • Medium to heavy duty doors greater than 200 lbs. (91kg) with door seal pressures of 50-150 lbs. (23-60 kg) • Use with TriMark 070-0201 Striker Bolt FEATURES/BENEFITS: • Heavy duty modular construction — survives in punishing environments • Can be used on retrofit or new surface mount vehicle construction • Heavy duty latch/striker with self-aligning “slam cam” provides rotor/cam assist to heavy doors, hinges and compensates for door sag TriMark Corporation TriMark Europe Cedar Court Walker Road Bardon Hill Coalville LE67 1TU United Kingdom Tel: +44(0)1530 512460 Fax: +44(0)1530 512461 www.trimarkeu.com

Open the catalog to page 1

050-0850 TriGuard Heavy Duty Latch Module With Slam Cam Option AVAILABLE:  Right or left hand configurations (right hand shown)  Striker with self-aligning “slam cam”  Replaceable striker alignment lift blocks  Custom configured release levers INSTALLATION:  Four M8 X 1.25 class 8.8 or better fasteners are recommended (not included)  Tighten to the manufacturers' recommended torque value MATERIAL:  Case halves: high strength steel  Springs: non-corrosive stainless steel Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions,...

Open the catalog to page 2