Applications : Compressed air is a vital part in textile industry in all phases of spinning, weaving, loom and knitting. The quality of compressed air required to be on various specification based on the industry, are: Why do we need Air Dryers ? Blow room to ring frame consist of pneumatic system with solenoid valves and cylinders which are operated with compressed air. It is necessary that the air has to be clean and dry, in order to keep it away from rust formation and condensation which could corrode the smooth surfaces of the cylinder. Alternatively the foreign particles could lock the solenoid...

** As per ISO 7183 option B rated condition DP Series Designed and tested to provide 100% clean, dry, oil free compressed air at -40oC atmospheric dew point, to safeguard your valuable pneumatic equipment. Available in 19 models to suit specific requirements. For pressures upto 70 bar and flow upto 10,000 cfm. Salient features : • Extensive Mimic display with Electronic Controller • Energy saving purge economiser • Stainless Steel Filters Catridges • Fabrication Code : IS 2825 • Dewpoint better than -40oC Optional : • Fabrication Code : ASME SEC VIII DIV I • Dewpoint based changeover Item Code...

Coldspell Designed and tested to provide 100% clean, dry, oil free compressed air at -23oC atmospheric dew point, to safeguard your valuable pneumatic equipment. Available in 17 models to suit specific requirements. For pressures upto 70 bar and flow upto 5000 cfm. Salient features : • Large condenser for high ambient temperatures • Microprocessor based controller • Anti-recycle feature for compressor protection • Low pressure drop across advanced heat exchangers saves energy • The dryers have been designed for nominal standard inlet conditions as per ISO 7183 - 2007 • Dryer Quality class - ISO...

Cleansweep Coalesing is a continuous natural process in which oil and water particles that pass through the filter element come into contact with a fibre strand and unite with other collected aerosole to form droplets. The droplets fall to the bottom of the housing and are drained away. Salient features : • Very low installation clearance - Install anywhere • Oil Removal (Coalescing) and Particulate • Flow from 100 cfm to 1810 m3/hour • Particle Removal 0.01 (pm) • Max. Oil carryover 0.003 (mg/m3) Replacement Element X - Element Grade ; IA - Internal Automatic float drain. Ordering Code : Example...

Compact Timer Drain - CTD Series CTD is the culmination of years of manufacturing drains. It takes care of all problems normally associated with drains. The controller is now built of ultra reliable micro controller and feature dual adjustment of both cycle and drain. The valve has a large orifice and special solenoid operator section to discharge dust. Should the valve still get clogged you can service it without removing from the installation. Press the knob at the bottom of the valve to mechanically clear all the sludge. Electronically flush a few times and now it is fully serviced and ready...