Lasting Values Split Flow Air Dryer (No Purge Loss) Heated Desiccant Dryer - DS Solution provider for Onshore and Offshore Applications Dewpoint better than -40oC I n d i a ’ s L a r g e s t E x p o r t e r o f C o m p r e s s e d A i r Tr e a t m e n t P r o d u c t s

MIXING CHAMBER DS Series Specifications Model Designed for Air Inlet Pressure 7 kg/cm2 Designed for Air Inlet Temperature 38oC Designed for Ambient Temperature 35oC Desiccant : Activated alumina with adsorption capacity 14%

adsorbed by the desiccant during drying. It then passes The Split Flow Dryer works on the Principle of Thermal Swing. The desiccant adsorbs moisture from the compressed air to deliver dry air. saturates over a period of time. regenerated by heating with split hot air using a Heater. Since the temperature of the bed swings between the compressed air temperature and the regneration temperature, it is called Thermal swing type. through an after cooler and a oisture separator by means of a 4/2 way valve. This air is then mixed with the inlet air at a stage and is passed through the tower in which...

Local Panel Interface Central Control Room Interface • Flow indication • Low Flow Alarm • Heater failure alarm • Inlet Valve change over failure • Emergency stop • Tower function status • System On/Off condition • Heater On/Off • Alarm Reset • Dewpoint Indicator (Optional) • Dew Point Alarm (Optional) • Heater failure • Run • Trip • High Moisture Level Content (Optional) • High Moisture Level Alarm (Optional) Manufacturing Facility Our Presence Trident Pneumatics Pvt Ltd Shanghai, China. Selangor, Malaysia. Sales & Service Outlets e-mail : [email protected] Website : www.tridentpneumatics.com...