Z-Series Syringe Pump
4Pages

Z-Series Pumps > Electronic air displacement pipetting modules 200 u± > Exceptional precision and accuracy 1000 u± > Can be configured for mounting to a robotic arm 2000 u± > Interfaces with the M-Series motion controllers 5000 u± CUSTOMER REQUIREMENTS > Drive Recommendations Pump should typically be driven with a 24 VDC bipolar chopper drive, % step, at rated current. Higher voltage may be required at higher step CONFIGURED OPTIONS BASE MODEL (Shown with optional

Step Resolu on Per Full Step Per Half Step Weight Z‐Pump without Tip Adapter Z‐Pump with Tip Adapter Z‐Pump with Tip Adapter and Tip Syringe Data Bore Stroke Fluid Contact Materials (in case of accidental uid aspira on) Acetal, PTFE, Silicone Lubricant, Buna N, Neoprene, Borosilicate Glass and Stainless Steel FUNCTIONAL PARAMETERS Performance (at full volume) with p adapter and p noted above Accuracy within Precision within Motor / Leadscrew Data Travel / Full Step Travel / Half Step Resistance / Phase Inductance / Phase Rated Current Rated Voltage

SHOWN WITH TIP ADAPTER Cat. # 10006 SHOWN WITH TIP ADAPTER Cat. # 10005 SHOWN WITH TIP Cat. # 10000 SHOWN WITH TIP ADAPTER Cat. # 10007 SHOWN WITH TIP ADAPTER Cat. # 10008 *Note: Each p is designed to seal within the reference gap dimension shown. Customers should perform their own tes ng to determine op mum force/ loca on for sealing and p stripping.

Dimensions/Features noted are typical for any size, Z-Series Pump (5000 ml shown) BLUE = AGREEN = A+ RED = B+ BLACK = B- 5 Pos IDC-style connector 28 AWG, 0.10 centers .05 X Ø.25 (NON-THREADED PORTION OF BODY) THREAD RELIEF OPTIONAL Ø.062 FOR 200 µL AND 1000 µL Ø.082 FOR 2000 µL AND 5000 µL RECOMMENDED TIP ADAPTER INTERFACE 4 X Ø.14 THRU V Ø.24 X 82° (MOUNTING HOLES) Note: Dimensions in inches unless otherwise specified. AIR DISPLACEMENT PUMP SOLUTIONS FOR OEMS WORLDWIDE tricon nent.com TriCon nent by Gardner Denver 12555 Loma Rica Drive Grass Valley, CA 95945 Tel: 800‐937‐4738 Fax:...