1. Catalogs
  2. TriContinent
  3. MC6000 Multi-Channel Syringe Pump

MC6000 Multi-Channel Syringe Pump

MC6000 Multi-Channel Syringe Pump

MC6000 Multi-Channel Syringe Pump

Product catalog summary
Features
  • Rotary shear valves with 1/4–28 female ports offering integrated bypass capability.
  • Full quadrature encoder for absolute syringe positioning.
  • Front panel LED flow and status indicators.
  • Valve drive time of less than 250 ms between neighboring ports.
  • Capability to address up to 15 pumps individually.
Base Models
  • MC6000-4
  • MC6000-6
  • MC6000-8
Customer Requirements
  • Interface Type: USB, RS232, RS485, or CAN.
  • Communication Rates: RS232/RS485 at 9600 or 38400 baud; CAN at 100 K, 125 K, 250 K, 500 K, 1 M baud.
  • Format (RS232/RS485): Data Bits - 8, Parity - None, Stop Bit - 1, Half Duplex, Data Terminal and OEM protocols.
  • Environmental (Operating): Temperature range from 15°C to 40°C (59°F to 104°F), Humidity from 20 to 95% RH at 40°C (104°F).
Configured Options
  • Available in 4, 6, or 8 channel syringe configurations.
  • Syringe Sizes: 50 μL, 100 μL, 250 μL, 500 μL, 1 mL, 2.5 mL, 5 mL.
Specifications and Functional Parameters
  • Drive Design: Stepper motor/leadscrew with 30 mm of travel.
  • Stroke Speed: 1.2 seconds to 100 minutes per stroke (800 minutes in microstep mode).
  • Step Resolution: Standard mode 6,000 steps, Hi-Res mode 48,000 steps.
  • Syringe Design: 30 mm stroke glass syringe with ¼ - 28 fitting, PTFE seals (long-life UHMWPE seals available upon request).
  • Fluid Contact Materials: Syringe - Borosilicate glass (seal) PTFE or UHMWPE; Valve - PEEK (body) and UHMWPE (rotary plug).
  • Imprecision (full stroke) at 50 μL to 100 μL: < 0.1% CV.
  • Inaccuracy (full stroke): < 1% syringe volume.
  • Power Requirement: 24 VDC ± 10%.
  • Power Rating: ≤ 1.5 Amp (peak).
  • Imprecision (full stroke) at 250 μL to 12.5 mL: < 0.05% CV.
Dimensions
  • 4 Channels: Width 5.12, X-Mounting 4.74
  • 6 Channels: Width 6.43, X-Mounting 6.03
  • 8 Channels: Width 7.72, X-Mounting 7.32
Contact Information

TriContinent by Gardner Denver
12555 Loma Rica Drive, Grass Valley, CA 95945
Tel: 800-937-4738
Fax: 530-273-2586
Email: [email protected]

See more

Catalog excerpts

MC6000 Multi-Channel Syringe Pump-1

MC6000 Mul ‐Channel Syringe Pump BASE MODEL Full quadrature encoder for absolute syringe posi oning Interface Type USB, RS232, RS485 or CAN Communica on Rates RS232/RS485 9600 or 38400 baud CAN 100 K, 125 K, 250 K, 500 K, 1 M baud Format (RS232/RS485) Data Bits ‐ 8, Parity ‐ None, Stop Bit ‐ 1 Half Duplex, Data Terminal and OEM protocols Environmental (Opera ng) 15°C to 40°C (59°F to 104°F) Temperature Humidity 20 to 95% RH at 40°C (104°F)

 Open the catalog to page 1
MC6000 Multi-Channel Syringe Pump-2

FUNCTIONAL PARAMETERS Fluid Contact Materials Syringe ‐ Borosilicate glass (seal) PTFE or UHMWPE Valve ‐ PEEK (body) and UHMWPE (rotary plug) ALL DIMENSIONS UNLESS OTHERWISE SPECIFIED .XXX ±.008 (.02 mm) (MILLIMETERS SHOWN IN BRACKETS) tricon nent.com TriCon nent by Gardner Denver 12555 Loma Rica Drive Grass Valley, CA 95945 Tel: 800‐937‐4738 Fax: 530‐273‐2586 liquidhandling@tricon nent.com The informa on presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is oered as an aid to help in the selec on of TriCon...

 Open the catalog to page 2

All TriContinent catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.