1. Catalogs
  2. TriContinent
  3. C-Series Syringe Pump

C-Series Syringe Pump

C-Series Syringe Pump

C-Series Syringe Pump

Product catalog summary
Features
  • The C-Series Syringe Pumps serve as a seamless replacement for previous models such as XP, XCalibur, PSD/4, and PVM pumps.
  • High-resolution options are available, offering up to 192,000 steps per full stroke.
  • The pumps feature a proprietary high-efficiency, maintenance-free drive system.
  • Long-life rotary shear valves are included, lasting up to 24 times longer than competing valves.
  • Valve drive time is less than 250 ms between neighboring ports.
  • Up to 15 pumps can be individually addressed.
Base Models
  • C3000
  • C24000
Customer Requirements
  • Interface: Options include RS232, RS485, or CAN with communication rates of 9600 or 38400 baud for RS232/RS485 and 100 or 125 kbits for CAN. The format for RS232/RS485 includes 8 data bits, no parity, and 1 stop bit, supporting half duplex, data terminal, and OEM protocols.
  • Environmental (Operating): Temperature range is 15°C to 40°C (59°F to 104°F) with humidity levels from 20 to 95% RH at 40°C (104°F).
Configured Options
  • Syringe Sizes: Available sizes include 50 μL, 100 μL, 250 μL, 500 μL, 1 mL, 2.5 mL, 5 mL, and 12.5 mL.
  • Fluid Contact Syringe Material: Options include Borosilicate Glass and UHMWPE or PTFE seals, supporting pressures up to 80 PSI.
  • Fluid Contact Valve Material: Options include PCTFE or PEEK housing and PTFE or UHMWPE plugs, supporting pressures up to 100 PSI.
Specifications
  • Drive Design: Direct drive stepper motor/leadscrew with 30 mm of travel, manually moveable for "power off" syringe removal.
  • Stroke Speed: Ranges from 1.2 seconds to 100 minutes per stroke (800 minutes in microstep mode) and 4.2 seconds to 800 minutes per stroke (3200 minutes in microstep mode).
  • Step Resolution: Standard mode offers 3,000 steps, while Hi-Res mode offers 24,000 steps for C3000 and 192,000 steps for C24000.
  • Functional Parameters: Imprecision for full stroke at 50 μL to 100 μL is less than 0.1% CV, and less than 0.05% CV for 250 μL to 12.5 mL. Inaccuracy for full stroke is less than 1% of syringe volume.
  • Power Requirement: 24 VDC ± 10% with a power rating of ≤ 1.5 Amp (peak).
Contact Information

TriContinent by Gardner Denver, 12555 Loma Rica Drive, Grass Valley, CA 95945. Tel: 800-937-4738, Fax: 530-273-2586, Email: [email protected]

See more

Catalog excerpts

C-Series Syringe Pump-1

Interface Type Communica on Rates Format (RS232/RS485) Environmental (Opera ng) Temperature 15°C to 40°C (59°F to 104°F) Humidity 20 to 95% RH at 40°C (104°F)

 Open the catalog to page 1
C-Series Syringe Pump-2

4X M3 X .25 MIN. DEEP BOTH SIDES FOR TOTAL OF 8 HOLES RIGHT SIDE PUMP AND VALVE SOLUTIONS FOR OEMS WORLDWIDE tricon nent.com TriCon nent by Gardner Denver 12555 Loma Rica Drive Grass Valley, CA 95945 Tel: 800‐937‐4738 Fax: 530‐273‐2586 liquidhandling@tricon nent.com The informa on presented in this material is based on technical data and test results of nominal units. It is believed to be accurate and reliable and is oered as an aid to help in the selec on of TriCon nent products. It is the responsibility of the user to determine the suitability of the product for the intended use and the user assumes all risk and liability in connec...

 Open the catalog to page 2

All TriContinent catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.