C series Replacement Syringes

Product catalog summary

Specifications:
The document lists various syringe models with their respective volumes ranging from 50 µL to 12.5 mL. The materials used include UHMWPE Seal and Borosilicate Glass for the first set of syringes, and PTFE seal and Borosilicate Glass for the second set. Both sets have a fitting interface of 1/4 - 28 and a stroke of 3 cm. The second set of syringes is compatible only with specific TriContinent models.

Replacement Procedure:
The document provides a step-by-step guide for replacing syringes in TriContinent pumps. It includes instructions for lowering the plunger driver, removing the syringe, and installing a new one. Specific commands are provided for different pump models (C3000 and C24000) to lower the plunger driver.

Contact Information:
TriContinent's contact details are provided, including their address, phone numbers, fax, email, and website.

Catalog excerpts

C-Series Replacement Syringes Materials: UHMWPE Seal, Borosilicate Glass Fitting Interface: 1/4 - 28 Stroke: 3 cm *Compatible only with the TriContinent C3000 Model #8657-15 and C24000 Model #8657-11. Materials: PTFE seal, Borosilicate Glass Fitting Interface: 1/4 -28 Stroke: 3 cm

Open the catalog to page 1

SYRINGE REPLACEMENT To replace the syringe, prime all fluid from the syringe, and follow the steps below: 1. To replace the syringe, lower the plunger driver. = For the C3000 pump, if the power is on, this can be done by sending the A3000R command or if the pump is powered off, manually lower the plunger by pushing firmly down on the syringe plunger holder. C24000 pump, with the power on, send the A24000R command. You cannot manually lower the plunger on the C24000 pump. 2. Turn the plunger lock screw counterclockwise 3 turns. 3. Turn the syringe counterclockwise and remove from the valve. To...

Open the catalog to page 2

C series Replacement Syringes

C series Replacement Syringes

Catalog excerpts

All TriContinent catalogs and technical brochures