Wood Splitter Models and Specifications

This document provides technical specifications and optimal usage guidelines for the WS series of wood splitters, designed to be attached to excavators.

Models Overview

• WS 004
• WS 006
• WS 008
• WS 010
• WS 012

Optimal and Possible Excavator-Equipment Combinations

The document distinguishes between two types of excavator-equipment couplings:

• Optimal coupling (1): Recommended excavator and wood splitter combinations for best performance.
• Possible coupling (2): Acceptable but less ideal combinations.

Technical Specifications

Additional Parameters

The document includes ranges of unspecified parameters, possibly related to operational or hydraulic settings, with values such as 5-9, 6-8, 2.5-5.5, 3-5, 8-14, 9-13, 13-23, 14-21, 21-35, and 22-30. These likely correspond to performance or compatibility metrics but are not explicitly defined.

Summary of Critical Information

• Weight and size: Each model increases in weight and dimensions (A, B, C, D), indicating suitability for progressively larger excavators.
• Force capacity: Ranges from 5 to 42 tons, indicating the splitting power.
• Hydraulic requirements: Operating pressure ranges from 200 to 310 bar, with flow rates from 30 to 300 l/min depending on the model.
• Maximum pressure and flow: Max pressure is 120-140 bar, max flow is 5-10 l/min, likely referring to control or pilot circuits.

Best Practices and Recommendations

• Use the optimal excavator-equipment combinations for best performance and safety.
• Ensure hydraulic system parameters (pressure and flow) match the specifications for the selected model.
• Consider the weight and size of the splitter relative to the excavator to maintain balance and operational efficiency.