Catalogs >
Trelleborg Wheel Systems >
tires and wheels for light services

tires and wheels for light services
16Pages

Catalog excerpts

Tyres and Wheels for Light Service

Tyres for Light service The tyres for light service are designed for farming, industry, turf, snow and high speed service and are suitable for rims up to 16 inches in diameter. In this product segment, Trelleborg has one of the largest ranges in the world. Together with the wide range of wheels, Trelleborg can supply complete wheel solutions to customers, in high quality and perfect design. High Speed tyre with high Farming tyre with Industry tyre Combined pattern for Combined pattern for Combined pattern for shoulder profile. traction pattern. with combined pattern. green area and green...

Open the catalog to page 2

Wide farming, garden and High speed tyre with easy Farming tyre with Farming tyre with extra Industry, farming and snow tyre with traction rolling pattern. especially easy rolling g00d sidewall stability. green area tyre with pattern. pattern. smooth pattern. High Speed or industry tyre Tyre especially made for Industry tyre with good grip High Speed tyre with Farming tyre with with high shoulder. snow machines. and low roll resistance. combined pattern. combined pattern. Combined tyre for green Combined tyre for green area, farming, industry or high speed service. Skid Steer tyre with good...

Open the catalog to page 3

Tyres for Light Service Technical specifications TYRES 3" SIZE TREAD PATTERN PERMITTED RIMS TREAD PATTERN PERMITTED RIMS Green Area TREAD PATTERN Green Area PERMITTED RIMS TREAD PATTERN PERMITTED RIMS High Speed Green Area Green Area Green Area Green Area/Farming Green Area/Farming Green Area

Open the catalog to page 4

Tyres for Light Service TYRES 10" PR/LI TREAD PATTERN High Speed PERMITTED RIMS Skid Steer Green Area Skid Steer Green Area TREAD PATTERN PERMITTED RIMS Skid Steer Green Area/Farming Green Area Green Area Green Area/Farming Green Area/Farming Green Area Green Area/Farming Snow Groomer

Open the catalog to page 6

TYRES 13" MAIN RANGE OF USE PERMITTED RIMS Snow Groomer TREAD PATTERN TREAD PATTERN Snow Groomer PERMITTED RIMS TREAD PATTERN PERMITTED RIMS TREAD PATTERN PERMITTED RIMS Green Area/Farming Green Area/Farming Green Area/Farming Green Area/Farming Green Area/Farming TREAD PATTERN PERMITTED RIMS TL = Tubeless. LI = Load index. RC = Rolling circumference = Calculated values.

Open the catalog to page 7

Cross-ply Tyres Twin Garden Specially designed for grass and sensitive ground conditions. Its soft carcass design, considerate tread pattern and low ground pressure all contribute to no track formation and very little soil compaction. This tyre is also flexible for both soft and hard surfaces. Load data in the table is valid for only one tyre only. _ n , ■ ■ ■ . . . u Tyres for gentle service on green areas. Reference speed, load and inflation pressure are shown in bold. ' b w _. T , * ■ r. J T . . 25 = 25 km/h concerns service on green areas on road. TL = Tubeless. Tubes are not suitable...

Open the catalog to page 8

Tyres for Light Service Load Index The Load Index (LI) is an international code, indicating the maximum load for a tyre independent of its type or size. Speed Index The Speed Index (SI) is an international code indicating the maximum speed for which a tyre is designed.

Open the catalog to page 9

tires and wheels for light services - 10

Light Service Tyres The Trelleborg range of wheels and rims, is available from 3" to 16" in size and can be supplied in many different configurations depending on application, requirements for load capacity and several other values influencing The wheels and rims are designed with different specifications - ie. sizes, integral hubs, bearings, bores, offsets, plate thickness, paint finish etc. that match the performance requirements defined. Rims and Wheels available The table contains the product range available in term of dimensions, widths and configurations. The columns welded/divided...

Open the catalog to page 10

tires and wheels for light services - 12

Technical information about rims and wheels Size The first figure specified for a rim or wheel indicates its width in inches. The last figure indicates its diameter in inches. The letter after the first figure indicates the contour of the rim or wheel. The symbol after the letter indicates whether it has been assembled or welded. 5.00Ax8 8 indicates the rim/wheel diameter in inches 5.00 indicates the rim/wheel width in inches x indicates that rim/wheel is welded R indicates rim/wheel contour - indicates that rim/wheel is divided

Open the catalog to page 12

tires and wheels for light services - 13

The difference between a rim and a wheel Rim A rim consists of two drop-centred disc or two flat-based disc with a bore, welded or assembled. The rim is fitted onto a hub and therefore it is vital that the diameter of the pitch circle of the stud holes is the same on the rim as on the hub. The standard stud holes are pressed with a conical stud seat of 60°, 80° and 90° both for welded and assembled rims. A wide range of bores are available so that rims can be supplied with a bore to meet your specific demands. Wheel A wheel consists of two drop-centred disc welded together or two flatbased...

Open the catalog to page 13

tires and wheels for light services - 14

The difference between a rim and a wheel The paint finish Trelleborg uses a fully automated phosphating and powder painting facility which gives the products a perfect finish and allows the choice of more than fifty different RAL colours. Furthermore, there is the possibility to choose your own colour outside this range when ordering a large number of units. Integrated hub types The integrated hubs are designed to match the axle specifications and the required load capacities. The hubs can be designed with a number of different bearings, lubrication nipples, stub axles, seals, caps, axles...

Open the catalog to page 14

tires and wheels for light services - 15

Hub types and axles Trelleborg also produces a wide range of hubs and stub axles (up to a length of 600 mm). The hubs are designed with a flange of different size and bores matching the rim specifications. Furthermore the hubs can be designed with a number of different bearings, lubrication nipples, seals, caps, axles and other features. Examples of hubs available Hub for fork mounting. Possible to get different sizes. Possible to get different sizes with suitable axles. Bearing: ball bearings or tapered roller bearings Bearing: ball bearings or tapered roller bearings

Open the catalog to page 15

tires and wheels for light services - 16

Trelleborg Wheel Systems UK Ltd 1 Redwing Court Willow Farm Business Park Castle Donington, Derby DE74 2UH Tel: +44 (0) 1530 565656 - Fax: +44 (0) 1530 565630 www.trelleborg.com/wheelsystems_uk

Open the catalog to page 16