TRELLEBORG FLUID HANDLING SOLUTIONS MECHANICAL & PHYSICAL PROPERTIES CHEMICAL RESISTANCE FEATURES •Wear resistant natural rubber, red. •Excellent mechanical properties: tensile strength, elongation at break, tear resistance, abrasion, etc. •Excellent resistance to fine grain size products projection and fretting wear: sand, shot blasting, fine particles, abrasive dust, etc. •Great flexibility and resilience •Corrosion protection •Noise and vibration propagation reduction •Possibility to be produced with bonding layer for cold vulcanizing •Hoppers, chutes, operating cyclones, hydrocyclones, vibrating lines, extraction pump bodies, tanks, silos, etc., linings to protect equipment against very abrasive fine grain size products wear, due to their very nature (rock, wood, metal, all fine particle size materials, chemical products, etc.), density and hardness (medium to high), forms (fine particles, bulks, etc.), with dry conditions and maximum temperature 70°C. •Hanging panels fostering materials cleaning and removal. •Areas of activity: sand and gravel quarries, aggregate and cement industries, concrete plants, etc. •Always follow manufacturer warnings and instructions when using any cleaning product. Diluted acids and bases Good Concentrated acids and bases Medium Ozone Medium Oils and hydrocarbons Non suitable S REDFINE+ R397 TECHNICAL DATA SHEET - 22 September,

FINE GRAIN SIZE MATERIAL HIGH WEAR SHEETING Article number Stock Thickness Packaging Thickness <6mm rolled on cardboard tube 0 80mm. Thickness >6mm in roll. Bonding layer internal side protected by a white polypropylene film, easily removable by hand. Unless typographical error, information and figures of our technical datasheet are based on our experience and laboratory tests according to international standards. This data is intended to be used as a guideline only. Material performance depends on the conditions of use and the final application.