REELINE hoses REELINE hoses Catalogue www.trelleborg.com/fluidhandling TRELLEBORG FLUID HANDLING SOLUTIONS

Trelleborg group, leader in polymer solutions Trelleborg is a world leader in engineered polymer solutions that seal, damp and protect critical applications in demanding environments. Its innovative engineered solutions accelerate performance for customers in a sustainable way. The Trelleborg Group has annual sales of about SEK 21 billion (EUR 2.3 billion, USD 3.2 billion) in over 40 countries. In addition, Trelleborg owns 50 percent of Trelleborg Vibracoustic, a global leader within antivibration solutions for light and heavy vehicles, with annual sales of approximately SEK 14 billion (EUR 1.55...

Trelleborg Fluid Handling Solutions Trelleborg Fluid Handling Solutions is part of Trelleborg Industrial Solutions. With over 1,000 employees and a head office located in Clermont-Ferrand, France, Trelleborg Fluid Handling Solutions is a leading developer, manufacturer and supplier of low and medium pressure industrial hoses, oil and marine hoses, rubber sheeting and matting and expansion joints based on advanced polymer technology. We provide the optimum high performance solutions for every situation with production sites in France, Spain, Sweden, Brazil and Turkey. Trelleborg Fluid Handling...

REELINE [special design for reeling applications]

Reeline hoses REELINE hoses can be supplied according to API Spec 17K or GMPHOM 2009 standards Specific design for reeling system. Twice long service life (up to 10 years). In compliance with GMPHOM 2009 and API Spec 17K. A cost effective solution ● Twice long service life: up to 10 years. ● Double layer reel wind up. ● Minimized inspection and maintenance. ● ightweight and highly flexible allowing reeling system with overall L compact dimensions and smaller unity power. ● Continuous external diameter to prevent from hose damage. ● Flanges fully embedded in rubber to eliminate corrosion. ● igh...

REELINE [light offshore installation procedures]

Studies and analysis Studies and analysis Trelleborg propose dedicated studies and analysis for reeling systems: Specific tests can be performed to define the hose characteristics and to confirm that the design is in accordance with the application: ●● emergency release simulation, ●● crush test on sample, ●● crush load value determination, ●● buoyancy recovery test, ●● etc. Internal fluid parameters (pressure, temperature, fluid composition, flow rate, etc.) Detailed analysis Finite elements modeling (FEM) Finite elements analysis (FEA) Service life Design load case definition Design accidental...

Configurations Floating line Floating tanker rail hose Floating first off hose Floating tail line hoses Floating main line hose

Submarine line Submarine tanker hose Floating first off hose Submarine main line hose

General Data/Design Dual carcass Reinforced flange/Bolt indent Dual carcass Steel ring reinforcement Integrated bending stiffener Integrated bending stiffener Reinforced flange Reinforced flange External gasket External gasket Foam material Steel cables layers: reinforcement carcass main carcass Outer cover Bolt indent Continuous inner liner and integrated gasket Continuous inner liner and integrated gasket

Dual carcass Extra reinforced flange Reinforced flange Steel ring reinforcement Steel ring reinforcement Integrated bending stiffener Extra reinforced flange External gasket Steel cables layers: reinforcement carcass main carcass Steel cables layers: reinforcement carcass main carcass Outer cover Outer cover Continuous inner liner and integrated gasket

Working rated pressure Trelleborg hoses are designed and qualified to a working rated pressure (RP) of 15,19, 21 and 25 barg. Min. burst pressure: 5 x working rated pressure. Internal diameter Standard lengths Electrical continuity Trelleborg hoses are electrically continuous (EC) or Minimum bending radius Foam material Foam material used on hoses is made of closed cell foam. Foam can accept accidental immersion in water depth down to 30 meters without permanent deformation. Outer cover Outer rubber The outer rubber is made of antiabrasion rubber or polyurethane and incorporated nylon breaker....

Features Reinforced flanges The reinforced flange is made of two different parts: an integrated bending stiffener and steel ring reinforcement. This gives a perfect and smooth bending process, avoiding stress concentration and excessive fatigue due to either the connection or the environment. The manufacture consists in using steel plates fixed on steel cable layers. The steel cable, bonded within the hose, provides a highly resistant structure to both pressure and axial forces. The extra reinforced flange is used for severe environmental conditions like connecting to a manifold. It also increases...

Hose guide Dual carcass MAIN/TAIL LINE HOSES TANKER HOSES Half buoyancy Standard buoyancy

REELINE [Mid-ship offloading]

2015 - Non contractual document - Reproduction forbidden without prior authorization - TRELLEBORG pictures BU Fluid Handling Solutions Trelleborg Oil & Marine Hoses ZI La Combaude - Rue de Chantemerle - CS 10725 - 63050 Clermont-Ferrand cedex 02 - France Tel +33 (0)4 73 25 81 18 - Fax +33 (0)4 73 25 82 26 [email protected] - www.trelleborg.com/fluidhandling