Catalogs >
Trelleborg Industrial AVS >
Circular SAW? Mountings

Circular SAW? Mountings
2Pages

Catalog excerpts

Circular SAW™ Mountings Features The metal interleaf incorporated in the design provides a higher compression to shear stiffness ratio, thereby increasing the load capacity in the compression or combined compression and shear modes. The 17-1780 engine mounting features a void in the rubber section to allow the use of a central snubber device. type Circular SAW™ Mountings Used in a variety of industrial applications including vibratory rollers and small screens and for the suspension of smaller engines. 17-1780 can be fitted with a rebound washer for mobile applications.

Open the catalog to page 1

Circular SAW™ Mountings Note: The natural frequencies and degrees of isolation are based on dynamic characteristics of the mountings. Horizontal vibration Vertical load Vertical vibration Vertical load To select correct mounting, following data Select correct load line in diagram 1 and correct interference line in diagram 3. The load line intersects with required type Connect this intersection point vertically down to the interference line in diagram 3. Here, on the sloping curve, the isolation Forstatic deflection, see diagram 2.

Open the catalog to page 2